Polaroid DVR-0900 - Manual (Page 10)

- 10 -
2. Initial Recorder Setup:
Press the SETUP button on your remote and toggle as follows:
Channel Setup Auto CH Scan
Press the SETUP button on your remote 2 times to get back to main menu.
Press the WATCH TV button to watch TV or see #3 to watch a DVD movie
3. Watch a Movie - Insert a DVD movie disk. The DVD will automatically play bringing you to the
title menu.
NOTE: The DVD Recorder has its default channel list. This function allows you to watch TV without
going through the Auto CH Scan process. From the Setup Menu go to General setup option. Use
the Factory Default function to set the unit to factory default mode.
4. Record your favorite TV shows to DVD - Insert a DVD+RW or DVD+R disk, and press the
REC button on your remote control or on the unit while watching the TV show you wish to record.* It’s
that easy! *Expect a few seconds delay when recording starts and a slight delay when recording ends.
When a blank disc or recordable disc is inserted for the first time it will take about 30 seconds to read it.
5. Copy video to DVD – Connect the Video/Audio OUT jacks on your VCR or camcorder to the
color coordinated INPUT jacks on the DVD Recorder. Insert a DVD+RW or DVD+R disk. Press the
SOURCE button on the remote to select a recording source, press the REC button when ready to
record.
DO NOT RECORD ANY DVDs until you read this!
All DVD disks are not equal! In fact, certain DVD disk manufactures have perfected video recording
media. For best results, we recommend using the following brands of DVD disks when recording:
• DVD+RW: Use Hewlett Packard®, TDK®, Memorex® or Maxell®
• DVD+R: Use Hewlett Packard®
Visit www.polaroidelectronics.com for more product information and updates.