Panasonic SC-PM9 - Manual (Page 17)

Recording operations
17
RQT7360
Before recording
Types of tapes which can be recorded correctly
Use normal position tapes.
High position and metal position tapes can be used, but the
unit will not be able to record or erase them correctly.
The effect of volume and sound quality on recording
These have no effect on recording.
They can be changed for playback.
A Recording the radio
Preparation:
• Wind up the leader tape.
• To record from halfway through the tape
Wind the tape up to where you want to start recording.
1
Insert the cassette to be recorded on.
2
Tune to the required station.
( \ page 8 or 9)
3
Press [ ¶/8 REC] to start recording.
Recording CDs
B Normal recording
• Tracks are recorded in the order in which they are found on the CD.
• Tracks are cut in the middle when the end of the tape is reached.
• You can record from any point on the tape.
1
Insert the cassette to be recorded on.
2
Press [CD
3/8] and then [STOP 7].
3
Press [OPEN/CLOSE 0] to open the CD tray.
Insert the CD with label facing upward.
Press [OPEN/CLOSE
0] to close the CD tray.
4
Press [ ¶/8 REC] to start recording.
The recording will start from the first track.
A
STOP ,
–DEMO
3
1
1
OPEN
B
Insert inside the
guides
Forward side
OPEN
3
REC
B
4
3
2
1
1
OPEN
2
CD 3 / 8
➞
STOP 7
3
OPEN/
CLOSE
4
REC
To
stop recording
stop recording
temporarily
Action
Press [STOP
7
, –DEMO].
Press [
¶/8
REC].
Press again to resume recording.
To
stop recording
stop recording
temporarily
Action
Press [STOP
7
, –DEMO].
Press [
¶/8
REC].
Press again to resume recording.
RQT7360-B_17-18_EN 30/12/03, 2:49 pm 17