Porter-Cable PCB370SS - Manual (Page 8)

8
CARTON CONTENTS TOOLS NEEDED FOR ASSEMBLY
Supplied Not Supplied UNPACKING AND CHECKING CONTENTS
Carefully unpack the scroll saw and all its parts, and
compare against the list below and the illustration on the
next page. With the help of an assistant place the saw
on a secure surface and examine it carefully.
• To avoid injury from unexpected starting or electrical
shock, do not plug the power cord into a source of
power during unpacking and assembly. The cord
must remain unplugged whenever you are adjusting/
assembling the scroll saw.
• The scroll saw is heavy and should be lifted with
care. If needed, get the assistance of someone to lift
and move the scroll saw.
• If any part is missing or damaged, do not attempt
to assemble the scroll saw, or plug in the power
cord until the missing or damaged part is correctly
replaced.
TABLE OF LOOSE PARTS
ITEM DESCRIPTION QUANTITY
A. Scroll saw assembly 1
B. Hardware bag assembly
Blade 1
Hex key 1
STAND
C.
Short upper support 2
D. Long upper support 2
E. Leg 4
F. Short bottom support bracket 2
G. Long bottom support bracket 2
H. Stand hardware bag
Cushion 4
Serrated toothed
Hexagon flange nut
20
Cap hd. sq.neck bolt 16
Hex. hd. bolt 4
Flat washer 4
Spacer 4
WARNING !
Medium screwdriver
#2 Phillips screwdriver
Adjustable wrench
3 mm hex key