Pioneer DJM-900NXS-W User Manual
Page 20
En
20
SND/RTN (MIDI LFO)
Connect an external effector, etc., here.
By pressing the [LFO FORM (WAKE UP)] button, MIDI-compatible software and
devices can be controlled using MIDI signals.
SND/RTN
1
Connect an external effector, etc., here.
DJM-900nexus
SEND
RETURN
Effector
12
12
12
12
0
0
ON
TALK
OVER
OFF
9
6
-26
/
6
-26
/
6
-26
/
9
6
-26
/
6
-26
/
6
-26
/
9
6
-26
/
6
-26
/
6
-26
/
9
6
-26
/
6
-26
/
6
-26
/
0
BEAT c, d buttons (param-
eter 1)
—
TIME control (parameter 2)
—
LEVEL/ DEPTH control
(parameter 3)
This adjusts the sound level input to the [RETURN] terminal.
X-PAD (parameter 4)
—
MIDI LFO
The MIDI signal (0 – 127) waveform is changed according to the track’s tempo.
The MIDI signal waveform pattern switches each time the [LFO FORM (WAKE UP)]
button is pressed.
BEAT c, d buttons (param-
eter 1)
Use these to set a waveform output time of 1/4 – 64/1 with
respect to one beat of the BPM.
TIME control (parameter 2)
Use this to set the waveform output time.
LEVEL/ DEPTH control
(parameter 3)
—
X-PAD (parameter 4)
This changes the MIDI signal’s waveform pattern.
! When [MIDI LFO] is selected, the sound of the external effector connected to the [RETURN]
terminal is not input.
1
If the sound of the channel you want to monitor is not output from the [MASTER]
channel when [CF.A], [CF.B] or [MASTER] is selected with the [1, 2, 3, 4, MIC,
CF.A, CF.B, MASTER] selector switch, the effect sound cannot be monitored even
by pressing the [CUE] button for [BEAT EFFECTS].
2
If the effect is off, the effect sound cannot be monitored even by pressing the [CUE]
button for [BEAT EFFECTS].