Philips MAGIC 5 ECO PPF 695 - Manual (Page 14)

14 Philips PPF 685 · 695
EN
Redial list: Press and hold
@ (at least two seconds). Use
[ to select an entry from the list of the dialled numbers.
Caller List:
1 Press
[, and using [
CALLS select PERSON-
ALIS. .
2 Confirm with
OK.
3 Using
[, select from which list you would like to dial
a number.
4 Confirm with
OK.
5 Select the desired number using
[.
Adjusting volume level
Looking up Numbers
Looking up Numbers
During a call, you can look up the telephone book entries.
1 During a call, press
ô
Menu .
2 Use
[ to select
PHONEBOOK .
3 Using
[, dial the desired entry.
Previous menu
Calling additional telephone func-
tions
Function is not supported in all countries and networks (Function is not supported in all countries and
networks)
Additional telephone functions
You can use additional telephone functions with your de-
vice for example call on hold, three-way call or forwarding.
Contact your telephone company to inquire whether or
not these functions are available for your connection. The
signal to the switchboard to call these services is a short line
interruption (Hook Flash). Press the
R key to call the ad-
ditional telephone functions.
On the Device
Making a Second Call
1 During a call, press
R.
2 Enter the desired number using the numeric keypad or
select a saved entry.
Switching Between Calls
Switching Between Calls
Press
R, to toggle between the calls.
Receiving a Second Call
Call Waiting
During a call, you can be informed about another call by a
notification tone (= call waiting) if your telephone compa-
ny offers this service. The notification tone for call waiting
on the device is switched off in the factory.
Receiving a Second Call
During a call, press
R to accept the new call.
CLIP Prerequisite
Switching notification tone for call waiting on/
off
1 Press
OK, 42 and OK.
2 Use
[, to select whether you would like to turn the
call waiting on or off.
3 Confirm using
OK.
On the cordless telephone
Receiving a second call
During a call, press
ô
ACCEPT to accept the new call.
Switching between calls (= hold)
2: Call waiting
1 During a call, press
ô
Menu .
2 Using
[ select
SWITCH .
3 Confirm with
OK.
Making a second call
Dialling another number
1 During a call, press
ô
Menu .
2 Dial using
[
SECOND CALL .
3 Enter the desired number using the numeric keypad.
4 Press
ô
Call .
1: Ending a call
Hands-free
On the device
1 Press
ß to dial without lifting up the handset. You will
hear a dial tone from the loudspeaker.
2 Enter the desired number using the numeric keypad or
dial a saved entry. The dialling process begins immedi-
ately. Any incorrectly entered numbers can no longer
be changed now.
Handset near the device
On the cordless telephone
Low battery charge
Switching on hands-free
1 During a call, press
ô
Menu .
2 Using
[ select
Deact. .
3 Confirm with
OK.
Switching off hands-free
1 Select Deact. again.
2 Press
ô
Deact. .
Switching hands-free on/off
You can adjust the volume level of the speaker on the
cordless telephone using
[ even during a call.
Press
õ
Return to return to the previous menu lev-
el.
Press
R, to toggle between the calls.
For this function to work, the caller line identifica-
tion (CLIP) must be activated for your telephone
connection (country and network dependent). The
number and name will not be shown if the caller sup-
presses his number.
Hot key: Press
R, to toggle between the calls.
Hot key: Press
õ, and dial the other number.
Hot key: Press
õ and 1, to end the call and to ac-
tivate the call on hold.
Put the handset near the device with the microphone
facing up in order to achieve an optimum communi-
cation.
This function is not available if the battery charge of
the cordless telephone is low. Place the cordless tele-
phone into the charging station.
You can switch the hands-free mode on and off by
pressing
“ button during a telephone call.