Philips MAGIC 5 ECO PPF 695 - Manual (Page 43)

Telephone Lines and Additional Devices 43
EN
15 Telephone Lines and Additional Devices
Configuring Telephone Lines and
Services
PABX Systems
PABX Systems
Private branch exchanges (PABX) are typical in many of-
fices and some households. You must dial an outside line
access code in order to get a connection to the public tele-
phone network (PSTN) from a PABX.
External Device Not Extension
1 Press
OK, 96 and OK.
2 In some countries you can set the dialling process to
pulse dialling or tone dialling (DTMF tones). Use
[
to select the desired dialling process.
3 Confirm with
OK.
4 Use
[ to set whether you operate your device on an
extension.
5 Confirm with
OK.
6 Configuring an extension: Enter the outside line
access code with which you reach the public telephone
network. This is usually
0.
7 Confirm with
OK.
8 When finished, the device tests the telephone line.
Confirm with
OK.
9 Your device checks whether it can establish a connection
with the public telephone network. If it cannot establish
the connection, you are once again asked for input.
DSL Connection
In the event that you use a DSL modem: Connect the ma-
chine after the modem. For additional information, please
consult the operating manual of your DSL system.
ISDN Connection
ISDN Connection
Your device is an analogue fax device (Group 3). It is not
an ISDN device (Group 4), and therefore it cannot be op-
erated directly on an ISDN connection. In order to do this,
you need either an analogue adapter or a connection for
analogue terminals. Details for ISDN connections can be
found in the instructions provided with the terminal
adapter or the dial-up router.
Voice-Mailbox
You cannot simultaneously use the answering machine fa-
cility of your telephone service provider (= voice-mail box)
and receive faxes on your devices. Get the mail-box func-
tion for your telephone connection deactivated or set the
number of rings for the fax switch to lower than
5 on your
device (also see Chapter Setting the Fax Switch, Page 38).
When the fax switch accepts the call, the mail-box of the
service provider does not step in. Enquire with your tele-
phone company.
Registering and de-registering ad-
ditional cordless telephones
Configuring the Cordless Telephone
Normally your cordless telephone is registered with your
device in the factory. In the starting mode, press
OK. The
display shows on which base unit and with which number
the cordless telephone is registered.
Unregistered cordless telephones
Additional Cordless Telephones
You can register in all up to five cordless telephones with
your device. Using only original cordless phones as addi-
tional cordless phones ensures optimum use of all func-
tions. You can get original cordless telephones through our
order service or at specialist shops.
GAP Compatible
Registering cordless telephone
Registering cordless telephone
You must first bring the cordless telephone and then your
device (= base station) in the registration mode to register
a cordless telephone.
1 On the cordless telephone, press
[, and using [ se-
lect SETTINGS .
2 Confirm with
OK.
3 Select with
[
ADVANCED SET. .
4 Confirm with
OK.
5 Dial using
[
SET HANDSET .
6 Confirm using
OK.
7 Dial using
[
REGISTRATION .
8 Confirm using
OK.
9 Confirm using
ô
Yes . The cordless telephone goes
into registration mode.
10 Press
OK, 82 and OK on the device
11 Confirm the preset PIN code ( 0000 ) using
OK.
The cordless telephone is automatically registered. This
process can take a few minutes. Then the number with
which it is registered with the device appears on the display
of the cordless telephone.
Registering other cordless telephones
An additional telephone connected to the machine
on a telephone socket is not considered an extension.
Only use pulse dialling if tone dialling is not yet
activated for your telephone line.
In rare cases, the outside line access code may be
a different number or a two-digit number. For
older telephone systems, the outside line access
code can be R (= Flash). Press
R to enter this out-
side line access code. If the connection to the pub-
lic telephone network is not possible, contact
your telephone system supplier.
If you acquired a model with several cordless tele-
phones, only one cordless telephone is registered
with your device in the factory. Insert the batteries as
described above and register the cordless telephones
with your device (also see Chapter "Telephone Con-
nections and Additional Devices", page 43).
Additional cordless telephone must be GAP-compat-
ible.
You can register other cordless telephones with your
device in the same manner. If you face any difficulties
in registering, de-register all cordless telephones, and
re-register them individually.