Philips MAGIC 5 ECO PPF 695 - Manual (Page 15)

Telephone functions 15
EN
Mute mode
Mute mode
You can put the handset on mute, if you want to speak to
someone without letting the caller hear the conversation.
On the device
1 During a call, press
C. Your caller cannot hear any-
more.
2 Press
C again to continue with the call.
On the Cordless Telephone
Switching Dect to Mute
1 During a call, press
ô
Menu .
2 Using
[ select
SECRET .
3 Confirm with
OK. Your caller cannot hear anymore.
4 Press
õ
Exit to continue with the call.
Mute mode
Recording a Telephone Conversa-
tion
Recording a Telephone Conversation
You can record a telephone conversation. After recording,
the
ä button flashes, and you can hear the recording
like a message on the answering machine.
Recording a Telephone Conversation
Recording a Telephone Conversation
1 During a call, press
b. The recording begins.
2 Press
b again to end the recording.
Forwarding a call
Forwarding a call
You can forward calls from the device to registered cordless
telephones. From the cordless telephone, you can forward
calls to the device or to other cordless telephones.
From device
To a cordless telephone
1 During a call, press
{.
2 Dial the number of the cordless telephone using the nu-
meric keypad.
3 Hang up.
To all cordless telephones
1 During a call, press
{.
2 Hang up.
From the cordless telephone
To the device
1 During a call, press
ô
Menu .
2 Using
[ select
CALL TRANSFER .
3 Confirm with
OK.
4 Using
[ select
HANDSET 0 .
5 Confirm with
OK.
6 Press
’, to hang up.
To other cordless telephones
Forwarding a call to Dect Existence of several devices is the prerequisite
1 During a call, press
ô
Menu .
2 Using
[ select
CALL TRANSFER .
3 Confirm using
OK.
4 Select the cordless telephone to which you would like
to transfer the call using
[.
5 Confirm using
OK.
6 Press
’, to hang up.
Getting back the telephone call
You can get a transmitted telephone call back, before the
cordless telephone is picked up.
1 Press
ô
Menu .
2 Using
[ select
HANGING UP .
3 Confirm using
OK.
Placing internal calls
From device
Calling a cordless telephone
1 In starting mode, lift the handset.
2 Press
{.
3 Dial the number of the cordless telephone using the nu-
meric keypad.
Calling all cordless telephones
1 In starting mode, lift the handset.
2 Press
{.
Terminating intercom
From the Cordless Telephone
Calling the device
1 In the starting mode, press
{.
2 Dial using
[
HANDSET 0 .
3 Press
ô
Call .
Calling other cordless telephones
Intercom Dect Existence of several devices is the prerequisite
1 In the starting mode, press
{.
2 Using
[ dial the cordless telephone you would like to
call.
3 Press
ô
Call .
The mute mode of the cordless telephone can also be
switched on/off by pressing and holding
C (at least 2
seconds).
You must inform your caller when recording a tele-
phone conversation.
This function is available only if you have registered
several cordless telephones with your device and the
telephones are within the range of the machine.
You can also terminate an internal telephone call by
pressing
{ without hanging up. You can place an in-
ternal or external call.
This function is available only if you have registered
several cordless telephones with your device and the
telephones are within the range of the machine.