Paxar Stacker Monarch 932TM - Manual (Page 18)

3. Use the tab to lift the transport. Check for tags.
4. Remove the tags.
5. Lower the transport.
6. Replace the transport lock handle. Make sure it is completely
in the hole at the back of the stacker. Turn the handle down
to lock.
7. Press the Escape button to clear the status code.
8. Continue printing.
I n s t a l l i n g R i s e r B l o c k s
Install riser blocks as shown when using a printer and stacker
with a verifier. Make sure stacker feet seat securely in the riser
blocks.
Front of stacker, hole side goes up Rear of stacker, slotted side goes up
2-4 How to Operate