Paxar Stacker Monarch 932TM - Manual (Page 17)

S t a c k e r R u n n i n g
1. Pick up some of the tags in front of the tag weight.
2. Move the tag weight against the stack. Try not to push or
compress the stack.
3. Continue to remove tags.
C l e a r i n g a Ta g J a m
If a tag jams inside the stacker, the printer and stacker
automatically stops. The printer display or keyboard shows a 761
status code.
1. Check to see if the guide rails and tag stop are set for the
width and length of the tag. See Chapter 1.
2. Turn the transport lock handle up halfway and pull it
completely out.
Transport Lock
How to Operate 2-3