Philips FW-C38 - Manual (Page 15)

3139 116 19381
15
English
TUNER
STANDBY-ON
FW- C10 MINI HIFI SYSTEM
C D 1 • 2 • 3 BAND TAPE 1 • 2
TAPE CD TUNER AUX
PRESET ▲ ▲ TUNING ▲ ▲ ▲ ▲
STOP• CLEAR SEARCH PLAY• PAUSE PREV NEXT
3 C D ROTARY
CHANGER
S YSTEM
•
CD
REWRITABLE
COMPATIBLE
•
CD
SYNCHRO
RECORDING
•
D B B
CDR/VIDEO JOG
CONTROL
VOLUME
PROGRAM DIM RECORD DUBBING A.REPLAY INCREDIBLE SURROUND
V E C
D S C
T E C H N O
R O C K
J A Z Z
O P T IM A L
SOUND NAVIGATION - JOG RDS NEWS CLOCK • TIMER
Note:
– For 'EASY SET' feature, please refer to
page 10.
Tuning to radio stations
1 Press TUNER (BAND) to select TUNER
mode.
™ “TUNER” will be displayed.
A few seconds later, the current radio
frequency will be displayed.
2 Press TUNER (BAND) again to select
the desired waveband : FM, MW or LW.
3 Press à or á for more than one
second, then release.
™ The display will show “SEARCH”
until a radio station with sufficient
signal strength is found.
• Repeat this procedure until the desired
station is reached.
• To tune to a weak station, briefly press
à or á repeatedly until the display
shows the desired frequency and/or
when the best reception has been
obtained.
Storing Preset Stations
You can store up to 40 radio stations in the
memory. When a preset radio station is
selected, the preset number appears next
to the frequency on the display.
Automatic programming
1 Press TUNER (BAND).
2 Press PROGRAM for more than one
second.
™ The PROG flag starts flashing and
“ AUTO” will be displayed.
™ The system will search for every
available station in the FM waveband
first, then search the MW and LW
bands respectively.
™ All available stations will be stored
automatically. The frequency and
preset number will be displayed
briefly.
™ The system will stop searching when
all the available radio stations are
stored or when the memory for 40
preset radio stations is used.
™ The system will remain tuned to the
last stored preset radio station.
Notes:
– You can cancel the automatic
programming by pressing PROGRAM or
Ç (on the system only).
– If you want to reserve a section of
preset numbers, for example preset
numbers 1 to 9, select preset 10 before
starting automatic programming, only
the preset numbers 10 to 40 will be
programmed.
Manual programming
1 Press TUNER (BAND).
2 Press TUNER (BAND) again to select
the desired waveband : FM, MW or LW.
3 Press PROGRAM for less than one
second.
™ The PROG flag starts flashing.
™ The next available preset number will
be displayed for selection.
4 Press à or á to tune to the desired
frequency.
• If you wish to store the radio station to
another preset number, press 4 or 3 to
select the desired preset number.
5 Press PROGRAM again.
™ The PROG flag disappears and the
radio station will be stored.
• Repeat steps 3 – 5 to store other preset
radio stations.
Notes:
– When 40 radio stations are stored and
you attempt to store another radio
station, the display will show
"
PROGRAM FULL”. If you want to
change an existing preset number,
repeat steps 3 – 5.
– You can cancel manual programming by
pressing Ç (on the system only).
– During programming, if no button is
pressed within 20 seconds, the system
will exit program mode automatically.
pg 01-24/C38/22-En 3/7/00, 5:19 PM 15