Philips FW-C38 - Manual (Page 10)

3139 116 19381
10
English
Important:
Before you operate the system,
complete the preparation procedures.
Demonstration mode
The system has a demonstration mode that
shows the various features offered by the
system.
When the system is switched
on for the first time, the demonstration
mode will start automatically.
Notes:
– During the demonstration, if you press
any source (or standby-on) button, the
system will switch to the respective
mode (or standby).
– When the system is switched to standby
mode, the demonstration will resume 5
seconds later.
To stop the demonstration mode
• Press and hold Ç
(on the system only)
for 5 seconds when the system is in
demonstration mode.
™ The demonstration will stop.
™ "DEMO OFF" is displayed.
™ The system will switch to standby
mode.
Note:
– Even though the AC power cord is
removed from and reconnected to the
wall socket, the demonstration will
remain off until it is switched on again.
To start the demonstration mode
• Press and hold Ç
(on the system only)
for 5 seconds when the system is in
standby mode.
™ The demonstration will begin.
OPERATING THE SYSTEM
STANDBY-ON
FW- C10 MINI HIFI SYSTEM
C D 1 • 2 • 3 BAND TAPE 1 • 2
TAPE CD TUNER AUX
PRESET ▲ ▲ TUNING ▲ ▲ ▲ ▲
STOP• CLEAR SEARCH PLAY• PAUSE PREV NEXT
3 C D R OTARY
CHANGER
SYSTEM
•
CD
REWRITABLE
COMPATIBLE
•
CD
SYNCHRO
RECORDING
•
D B B
CDR/VIDEO JOG
CONTROL
VOLUME
PROGRAM DIM RECORD DUBBING A.REPLAY INCREDIBLE SURROUND
V E C
D S C
T E C H N O
R O C K
J A Z Z
O P T IM A L
SOUND NAVIGATION - JOG RDS NEWS CLOCK • TIMER
Easy Set
EASY SET allows you to store all available
radio stations and RDS stations
automatically.
1 Press and hold STANDBY ON (on the
system only) for 5 seconds when the
system is in standby or demonstration
mode.
™ “EASY SET” will be displayed, and
followed by “ TUNER” and then
“ AUTO”.
™ EASY SET will start searching for all
RDS radio stations with sufficient
signal strength and then followed by
radio stations on FM, MW and LW
band respectively. Weak RDS radio
stations may be stored in later
presets.
™ All available RDS and radio stations
with sufficient signal strength will be
stored. Up to 40 presets may be
stored.
2 The system will proceed to set the RDS
time automatically with the stored RDS
preset station.
• If no RDS station is available in the first
preset station, the program will exit
automatically.
™ After a radio station is found, “EASY
SET” will be displayed and followed
by “
TIME”
• When searching RDS time;
™ “SEARCH RDS TIME” will be
displayed.
™ When RDS time is read, “RDS
TIME” will be displayed. The current
time will be displayed for 2 seconds
and stored automatically.
Notes:
– EASY SET will start with the RDS
station, if there are still presets
available, it will continue to store the
FM, MW and LW bands respectively.
– When EASY SET is used, all previously
stored radio stations will be replaced.
– The last preset radio station or the first
available RDS station will appear on the
display when EASY SET is completed.
– If RDS station does not transmit RDS
time within 90 seconds, the program
will exit automatically and the display
will show “
NO RDS TIME”.
Switching the system ON
• Press CD, TUNER, TAPE or AUX.
You can also switch on the system by
pressing any one of the CD DIRECT PLAY
buttons.
pg 01-24/C38/22-En 3/7/00, 5:19 PM 10