Panasonic SC-AK320 EN - Manual (Page 11)

RQT7330
11
Starting play from a desired track in a
desired album
Remote control only
Preparation: Press [ :/ J, CD] and then [ L, CLEAR].
1 Press [ALBUM ( or )] and then the numbered
buttons to select the album.
To select album 10 or over, press [ >10] once then the two digits.
To select album 100 or over, press [ >10] twice then the three digits.
Play starts from the first track of the selected album.
2 Press the numbered buttons to select the track in the
current album.
To select track 10 or over, press [ >10] once then the two digits.
To select track 100 or over, press [ >10] twice then the three digits.
Play starts from the selected track.
Title search function
You can search for your desired album/track with its keyword (part of
the title).
Album title search
Preparation: Press [:/ J, CD] and then [L, STOP].
AK520 AK523 : Main unit and remote control
AK320 AK323 : Remote control only
1 Press [TITLE SEARCH] once.
2 Enter the characters of the keyword for the album
title.
(A see right: “Entering characters”)
3 Press [ENTER].
Album title search starts.
(Continued on next page)
For AK320 and AK323 , you can search for “ < ” or “ > ” by
entering “ ( ” or “ ) ”.
The characters change each time a numbered button is pressed.
For example, every time you press [2]:
A
→ B → C → 2
∧
To show the matched album title again ( AK320 AK323 )
Press [ENTER].
To show the next/previous album title search result
Press [ f,
4/FF] (next) or [ g, REW/3] (previous) on the
remote control.
(Main unit
AK520 AK523 : Push the joystick right ([ f,
CURSOR]) (next) or left ([ g,
CURSOR]) (previous). (You can
also press [ g/REW/
3] or [f/
FF/ 4].))
Press [ :/J, CD] to start play from the album found.
Play starts from the first track of the album.
(Title search mode is cancelled.)
To cancel partway through
Press [ L, STOP].
When there is no match for the searched keyword, the display shows
“NOT FOUND”.
Note
You cannot use title search function in program mode.
Track title search
Preparation: Press [:/J, CD] and then [L, STOP].
AK520 AK523 : Main unit and remote control
AK320 AK323 : Remote control only
1 Press [TITLE SEARCH] twice.
2 Enter the characters of the keyword for the track title.
(A see below: “Entering characters”)
3 Press [ENTER].
Track title search starts.
To show the matched track title again ( AK320 AK323 )
Press [ENTER].
To show the next/previous track title search result
Press [ f,
4/FF] (next) or [ g, REW/3] (previous) on the
remote control.
(Main unit
AK520 AK523 : Push the joystick right ([ f,
CURSOR]) (next) or left ([ g,
CURSOR]) (previous). (You can
also press [ g/REW/
3] or [f/
FF/ 4].))
Press [ :/J, CD] to start play from the track found.
(Title search mode is cancelled.)
To cancel partway through
Press [ L, STOP].
When there is no match for the searched keyword, the display shows
“NOT FOUND”.
Note
You cannot use title search function in program mode.
Entering characters
You can enter keyword of up to 8 characters for album/track title
search. You can only enter upper case letters but the unit also searches
for lower case.
On the remote control
1 1 1 1 1 Press the numbered button to select the required character.
Characters allocated to the numbered buttons:
=
Blinks to indicate album title search mode
Matched album title
Matched album title
Blinks to indicate album title search mode
=
Matched track title
Blinks to indicate track title search mode
Blinks to indicate track title search mode
Matched track title
AK320 AK323
AK320 AK323
AK520 AK523
AK520 AK523
Numbered Characters
buttons
6 M N O 6
7 P Q R S 7
8 T U V 8
9 W X Y Z 9
0 0
AK320
AK520
AK323
AK523
: space !”#$ %&’() ∗+,– ./:; = ?_ `
Numbered Characters
buttons
1 1
2 A B C 2
3 D E F 3
4 G H I 4
5 J K L 5
>10 : space !”#$ %&’() ∗+,– ./:;
<= > ?_ `