Philips VPZ210AT - Manual (Page 21)

Specifications/Glossary 21
Antenna: VHF (very high frequency; channels 2 - 13) and UHF
(ultra high frequency; channels 14 - 69).
AUDIO OUTPUT Jack: jack located on the back of the VCP
which is used to send audio to another source.
Cable: all standard channels can be received without a Cable
Box.
Frame: a single still picture.
Remote Control: the small electronic unit that came with your
VCP; allows you to operate your VCP from a distance.
Special Effects: forward and reverse searching, viewing a still
picture.
VCP: video cassette player.
VIDEO OUTPUT Jack: jack located on the back of the VCP
which is used to send video to another source.
Glossary
Video Heads
Two heads
Video Signal
EIA standards; NTSC color
Antenna
VHF/UHF – 75 ohm external anten-
na/cable terminal
VHF Output Signal
Channel 3 or 4 (switchable)
75 ohms unbalanced
Power Requirement
AC 120V ± 10%, 60Hz ± 5%,
DC 13.2V ± 10% (VPZ215AT only)
Power Consumption
AC 12W
DC 12W (VPZ215AT only)
Operating Temperature
41°F (5°C) to 104°F (40°C)
Relative Humidity
10% to 80%
Weight
5.5 lbs. (2.5 kg.)
Dimensions
14-3/16”(W) x 3-1/16”(H) x 9-1/16”(D)
(360 mm x 92mm x 230mm)
NOTE: Designs and specifications are
subject to change without notice.
Specifications
VPZ210/VPZ215 4/3/99 3:16 PM Page 21