Pride Mobility JAZZY 610 - Manual (Page 26)

26 www.pridemobility.com Jazzy 610
V . C O M F O R T A D J U S T M E N T S
12. Plug the controller connector(s) into the power base.
13. Reinstall the rear shroud and tighten the fasteners.
Swing-away Footrests
Swing-away Footrests (SFRs) enable you to rotate the foot-
rests to the side before you transfer onto or off or your power
chair. See figure 20.
To rotate the SFRs:
1. Push in the release lever.
2. Rotate the SFRs.
To adjust the SFR length:
1. Remove the two adjustment screws from the side of
each footrest extension.
2. Slide the footrest up or down to the desired length.
3. Reinstall the two adjustment screws.
Elevating Leg Rests
Elevating Leg Rests (ELRs) offer an infinite range of ad-
justment for the leg angle and a footrest adjustment range
of 12–19 in. See figure 21.
To rotate the ELRs:
1. Push in release lever A.
2. Rotate the ELRs.
To adjust the ELR angle:
1. Push down release lever B.
2. Move the leg rest to the desired angle.
To adjust the ELR length:
1. Remove the two adjustment screws from the side of
each leg rest extension.
2. Slide the leg rest up or down to the desired length.
3. Reinstall the two adjustment screws.
Figure 20. Swing-Away Footrests
ADJUSTMENT
SCREWS
FOOTREST
EXTENSION
SFR RELEASE LEVER
Figure 22. Heavy Duty Drop-In Leg Rests
ADJUSTMENT
BOLT
ADJUSTMENT SCREWS
ADJUSTMENT
SCREWS
RELEASE LEVER B
Figure 21. Elevating Leg Rests
RELEASE LEVER A
LEG REST
EXTENSION
LEG REST HANGER
LEG REST EXTENSION