Philips LTC 3924 - Manual (Page 8)

7
PHILIPS LTC3924/62 (E) QR34071
30. TAPE-IN INDICATOR
Lights when a cassette is in the compartment.
31. TAB INDICATOR
Lights when a cassette without its safety tab is loaded.
32. ALARM INDICATOR
ALARM appears during alarm recording.
ALARM flashes when alarm recording ends.
33. TAPE END INDICATOR
Lights when the tape reaches the end during record-
ing.
Note: “TAPE END” is not displayed when you have
selected REWIND, RE-REC in the “RECYCLE FUNC-
TIONS” menu in the alarm display or you have select-
ed REWIND, STOP IF ALARM but an alarm recording
has not bee made.
34. A INDICATOR
Lights when no video signal is input. Video signal
input will turn this indicator off automatically.
35. TIMER INDICATOR
This is lit during timer recording or TIMER stand-by
mode.
The indicator flashes in the following cases.
• A cassette is not loaded.
• A cassette without its safety tab is loaded.
• The timer has not been programmed.
36. LOCK INDICATOR
LOCK appears when the recorder is in the security
lock mode.
37. HARD INDICATOR
Lights when adjust the picture quality to hard during
playback mode and after setting.
38. SOFT INDICATOR
Lights when adjust the picture quality to soft during
playback mode and after setting.
39. VCR MODE INDICATORS
• appears during recording.
• tt appears during the rewind mode.
• ss appears during the fast forward mode.
• tt (or ss) flashes during visual search.
• s appears during the playback mode.
• t appears during the reverse play mode.
• ❙❙ appears when the STILL button is pressed
during play mode and disappears when the
STILL or PLAY button is pressed again.
• t ❙❙ (or ❙❙ s) appears while the FIELD REV (or
FIELD ADV) is held depressed in the still
playback mode.
Note: Still playback is restored when the
FIELD REV (or FIELD ADV) button is
released.
40. INDEX INDICATOR
INDEX appears when the ALARM INDEX button is
pressed.
INDEX disappears when the ALARM INDEX button is
pressed again.
INDEX flashes during alarm indexing.
41. DIGITAL COUNTER
Shows the tape counter. The counter does not count
during non-recorded sections of a tape.
In low temperature, display speed may be slow. The
count of a counter is ensured.
42. TAPE SPEED INDICATOR
Shows the tape speed.
REC
39 41 42 40
30
T A B TAPE END SPEED
TIMER REC HD
ALARM LOCK
INDEX
31 32 33 36 35 34
[DISPLAY]
A HARD
SOFT
37 38
CONTROLS AND FUNCTIONS (Continued)