Panasonic DMR-E85H - Manual (Page 17)

17
RQT7462
Reco
rd
in
g
Timer recording
[HDD] [RAM] [DVD-R]
You can enter up to 32 programmes up to a month in advance.
Entering G- CODE numbers is an easy way of timer recording. You can
find these numbers in TV listings in newspapers and magazines.
1
Press [G-Code].
2
Press the numbered buttons to enter
the G-
CODE number.
Press [ 2] to move back to correct a digit.
3
Press [ENTER].
≥Confirm the programme and make corrections if necessary
using [ 3, 4, 2, 1] ( ➡page 18, step 3).
≥When “-- ---” appears in the “Name” column, you cannot set
timer recording. Press [ 3, 4] to select desired programme
position. After you have entered the information of a TV
station, it is kept in the unit’s memory.
≥You can also press [REC MODE] to change the recording
mode.
≥You can also press [HDD] or [DVD] to select the recording
drive.
When the recording drive is “DVD” and there is not enough
remaining space, recording automatically switches to the
“HDD” (
➡right, Relief Recording).
≥RENEW (Auto Renewal Recording) [HDD] ( ➡page 18)
ON !)OFF
≥Programme Name
Press [ 2, 1] to select “Programme Name” and press
[ENTER] ( ➡page 30).
4
Press [ENTER].
The settings are stored.
Repeat steps 1–4 to programme other recordings.
5
Press [ F TIMER].
“ F” lights on the unit’s display to indicate timer recording
standby has been activated.
≥The message screen
appears. Only play is
possible while timer
recording is in standby (
➡page 20, 21). (You cannot play a
title recorded using a different encoding system from that of
the TV system currently selected on the unit.)
≥The unit is not off. To save power, turn the unit off by
pressing [ Í DVD].
Using G- CODE system to make timer
recordings
DRIVE SELECT
VOLUME CH
DVD
TV
AV
1 2 3
4 5 6
7 8
0
9
MANUAL SKIP
CH
CANCEL
INPUT SELECT
SKIP
STOP PAUSE PLAY/x1.3
SLOW/SEARCH
FUNCTIONS
ENTER
DIRECT NAVIGATOR
TOP MENU
RETURN SUB MENU
CREATE
CHAPTER
TIMER
PROG/CHECK
REC MODE ERASE REC
AUDIO
TIME SLIP STATUS DISPLAY
F
A B C
DUBBING
HDD DVD
-/--
G-Code
3,4,2,1
ENTER
F TIMER
PROG/CHECK
REC MODE
G-Code
HDD, DVD
¢ CANCEL
Í DVD
Numbered
buttons
1:58 SP DVD 30:24 SP Remain HDD
12:53:00 15. 7. TUE
Enter G-Code Number by using 0-9 keys.
G-Code
TIMER
RECORDING
12:54:00 15. 7. TUE
Programme Name
Mode Stop Start Name Date
HDD
DVD
20:00 19:00 15/ 7 TUE SP HDD 1 ARD
1:58 SP DVD 30:24 SP Remain HDD
∫ To release the unit from recording standby
Press [ F TIMER].
“ F” goes out.
≥Be sure to press [ F TIMER] before the programme start time to
put the unit on recording standby. Timer recording will work only
if “
F” is displayed.
∫ To cancel recording when recording has
already begun
Press [ F TIMER].
≥You can also press and hold [∫] on the main unit for more than
3 seconds to stop recording.
[Note]
≥Timer recordings are activated regardless of whether the unit is
turned on/off.
≥Timer recordings begin when the set time is reached even
when playing.
≥Timer recordings do not begin while editing or transferring
(dubbing) in normal speed mode ( ➡page 31).
≥“ F” flashes for about 5 seconds when the unit cannot go to
timer recording standby.
≥If the unit is not put in the timer recording standby mode at the
latest 10 minutes before the programmed timer recording
starting time, the “
F” flashes on the unit display. In this case,
press [ F TIMER] to put the unit in the timer recording standby
mode.
≥When you programme successive timer recordings to start
immediately one after the other, the unit cannot record the part
at the beginning of the later programmes (a few seconds when
recording with HDD or DVD-RAM and approximately 30
seconds when recording with DVD-R).
∫ Relief Recording
When the recording drive is set to “DVD” for timer recording and
if the programme will not fit onto the disc, the recording drive will
be altered to the “HDD” automatically.
≥If there is no disc in the tray or the disc cannot be recorded on
or when timer recording starts while transferring (dubbing), the
recording drive will be altered to the HDD.
≥The Direct Navigator shows which programmes were relief-
recorded (“ ” is displayed.) ( ➡page 20).
≥If the time remaining on the HDD is insufficient, as much of the
programme as possible will be recorded onto the HDD.
SP OK 20:00 19:00 ARD 15/ 7 TUE 01
Mode Stop Start No. Name Date
TIMER
RECORDING
12:55:00 15. 7. TUE
New Timer Programme
HDD
DVD
Disc space
1:58 SP DVD 30:24 SP Remain HDD
Check to make sure
“OK” is displayed.
Timer standby is active, only playback is possible.
7462L.book 17 ページ ２００４年３月２４日 水曜日 午前１１時４分