Philips HDRW 720/17 - Manual (Page 24)

17
Initial installation
After you have successfully connected the DVD Recorder and other
devices to your TV (as described in the previous chapter), this chapter
will help you start the initial installation. The DVD Recorder
automatically seeks and stores all available TV channels.
Switching on additional devices
If you have connected additional devices (satellite receiver,...) via the antenna
cable, switch them on now. The automatic channel search will recognize
them and save them. Please observe that you must switch on a "test signal"
for some additional devices.
No antenna connected
If you are only using the DVD Recorder as a playback device or you only
have a satellite receiver connected, you still need to perform the initial
installation. This is necessary so the basic settings can be saved correctly.
After the initial installation is completed once, you can use the DVD
Recorder normally.
1 Press STANDBY-ON m on the front of the DVD-recorder
P ' PHILIPS' and then 'IS TV ON?' will appear on the display.
P If the connection was properly made and your TV was
automatically switched to the channel number for the
input jack, e.g. 'EXT', '0', 'AV', you will see the following
picture:
InitialSetup
Menu Language
English
Español
Français
Press OK to continue
a My screen is empty.
b Depending on the initialisation procedure it can take some time
before the picture appears. Please press no button in the
meantime.
b If the TV set does not automatically switch to the program number of
the input jack, select the corresponding program number on your TV
set manually (see your TV's operating instructions).
b If your TV set is connected with the antenna cable only, you have to
select on the TV the right TV channel for the DVD-Recorder. (channel
3 or 4)
b If you use the the 'Progressive scan' connection, you must switch the
'Component Video output' of the DVD Recorder and, if necessary,
the 'Component Video input' of the TV to 'Progressive scan'.
To switch the DVD-Recorder to Progressive scan, hold down N on
the DVD Recorder while reconnecting the power cord. 'PRO'
(progressive scan) will appear on the display.
2 Select the desired language for the on-screen menu by pressing
B or A .
InitialSetup
Menu Language
English
Español
Français
Press OK to continue
What is an on-screen menu?
All settings and/or functions are displayed on your TV screen in one of
the available languages (English, French, or Spanish).
3 Confirm with OK .
4 Select the desired audio language using B or A .
InitialSetup
Audio Language
English
Español
Français
Português
Italiano
Press OK to continue
What is the audio language?
The DVD will play the sound in the language you select, provided this
language is available on the disc. If it is not available on the disc the first
language on the DVD will be used instead. The DVD Video Discmenu,
if available, will also be displayed in the language you select.
5 Confirm with OK .
6 Select the desired language for the subtitles by pressing B or
A .
InitialSetup
Subtitle Language
English
Español
Français
Português
Italiano
Press OK to continue
Installation