Planet Technology SVC2540 - Manual (Page 18)

-15-
4.2.2 IP Configuration
The IP Configuration includes the IP Address, Subnet Mask and Gateway. The screen in Figure 4-3 appears.
Figure 4-3 IP Configuration screen
The page includes the following configurable data:
IP Address - The IP address of the interface.
The factory default value is 192.168.0.100
Subnet Mask - The IP subnet mask for the interface.
The factory default value is 255.255.255.0
Gateway - The default gateway for the IP interface.
The factory default value is 192.168.0.1
#
Note :
After change the default password, if you forget the password. Please press and release the
“Reset”
button in the front panel of FT-90X, the current setting will be lost and the FT-90X will
restore to the default mode.