Philips MC-M250 - Manual (Page 17)

17
English
3140 115 29261
Clock/Timer
BAND
DISPLAY
MP3•ALBUM VOLUME
PRESET TRACK•SEARCH•TUNE PROGRAM
SOURCE TIMER SET CLOCK
REC
iR
S T A N D B Y -O N
-
+
Clock setting
1 In standby mode, press and hold CLOCK.
➜ The clock digits for the hours flash.
2 Press VOLUME +/- to set the hours.
3 Press CLOCK again.
➜ The clock digits for the minutes flash.
4 Press VOLUME +/- to set the minutes.
5 Press CLOCK to confirm the time.
Timer setting
● The system can be used as an alarm clock,
whereby the CD, TUNER or TAPE is switched on
at a set time. The clock time needs to be set first
before the timer can be used.
● You can also use it to record a favourite tuner
programme at a set period (refer to “Recording
timer”)
● During setting, if no button is pressed within 90
seconds, the system will exit timer setting mode
automatically.
1 In standby mode, press TIMER SET for more
than two seconds.
2 Press SOURCE repeatedly (or CD, TUNER,
TAPE on the remote control) to select the
sound source.
3 Press TIMER SET to confirm your desired
mode.
➜ The selected source
is shown.
Display sequence scrolls “SET ON TIME SET ON TIME SET ON TIME SET ON TIME SET ON TIME ” and
flashes. The clock digits for the hours flash.
4 Press VOLUME +/- to set the hours.
5 Press TIMER SET again.
➜ The clock digits for the minutes flash.
6 Press VOLUME +/- to set the minutes.
7 Press TIMER SET to confirm the time.
➜ The timer is now set and activated.
Activating and deactivating timer
● In standby or during playback, press TIMER
once on the remote control.
➜ Display shows if activated, and disappears if
deactivated.
Sleep timer setting
The sleep timer enables the system to switch off
by itself after a set period of time. The clock time
needs to be set first before the sleep timer can
be used.
1 Press SLEEP on the remote control repeatedly
to select a preset time.
➜ The selections are as follows (time in
minutes):
60 60 60 60 60 ™ 45 45 45 45 45 ™ 30 30 30 30 30 ™ 15 15 15 15 15 ™ 0FF 0FF 0FF 0FF 0FF ™ 60 60 60 60 60 …
➜ "SLEEP XX SLEEP XX SLEEP XX SLEEP XX SLEEP XX " or "OFF OFF OFF OFF OFF " is displayed. "XX XX XX XX XX " is the
time in minutes.
2 When you reach the desired length of time, stop
pressing the
SLEEP button.
➜ Once SLEEP is activated, "SLEEP ON SLEEP ON SLEEP ON SLEEP ON SLEEP ON " scrolls
across the display at repeated intervals.
To deactivate the sleep timer
● Press SLEEP repeatedly until "0FF 0FF 0FF 0FF 0FF " is displayed,
or press the STANDBY ON button.
pg 001-020/M250/21-Eng 4/16/02, 7:05 PM 17