Philips MC-M250 - Manual (Page 10)

10
English
3140 115 29261
Controls
(illustrations on page 3)
Controls on the system and
remote control
1
STANDBY ON y
– to switch the system on or to standby mode.
2
Display screen
– to view the current status of the system.
3
SOURCE
– to select the respective sound source : CD,
TUNER, TAPE or AUX.
4
BAND / DISPLAY
for Tuner ............. to select waveband : FM or MW.
for CD/MP3-CD…to select disc information
display mode.
5
PROGRAM
for CD/MP3-CD…to programme disc tracks.
for Tuner ............. to programme preset radio
stations.
6 34 PRESET / MP3•ALBUM / TIMER SET
for MP3-CD ..... to select previous/next album.
for Tuner ............. to select a preset radio station.
for Timer (
3) ... (on the system only) to set the
timer function.
7 S T TRACK•SEARCH•TUNE
(à
áon remote control)
for CD ................. to fast reverse/forward the disc.
for CD/MP3 CD…(on the system only) to select
a desired track.
for Tuner ............. to tune to a lower or higher
radio frequency.
for Tape ............... to rewind or fast forward.
8
Tape deck
9
OPEN ç
– to open tape compartment.
0 9
for CD/MP3-CD…to stop playback or to clear a
programme.
for Tape ............... to stop playback or recording.
!
VOLUME +/-
– to increase or decrease the volume.
– (on the system only) to adjust the hours and
minutes for the clock/timer functions.
@
RECORD
– to start recording.
# ÉÅ / CLOCK
for CD/MP3-CD…to start or interrupt playback.
for Tape ............... to start playback.
for Clock ............ (on the system only) to set the
clock function.
$
iR sensor
– infrared sensor for remote control.
%
OPEN•CLOSE ç
– to open or close the disc tray.
^
MODE
– to shuffle and repeat a track/disc.
& ¡ / ™
– to select a desired track.
*
DSC (Digital Sound Control)
– to select the desired sound effect : OPTIMAL/
ROCK/ JAZZ/ POP.
(
IS/DBB (Incredible Surround/Dynamic
Bass Boost)
– to create a super-enhanced stereo effect.
– to enhance the bass.
) MUTE
– interrupts and resumes sound reproduction.
¡
TIMER
– to activate/deactivate the timer function.
™
SLEEP
– to activate/deactivate or set the sleep timer.
£ B
– to switch the system to standby mode.
Notes for remote control:
– First select the source you wish to control
by pressing one of the source select keys on
the remote control (for example CD,
TUNER).
– Then select the desired function (for
example
Й , н , л ).
pg 001-020/M250/21-Eng 4/16/02, 7:04 PM 10