Polaris Scrambler 500 - Manual (Page 37)

35
SAFETY
Safety Decals and Locations
ALL WHEEL
DRIVE
SWITCH
Do not push switch to
engage AWD if the rear
wheels are spinning.
This may cause severe
drive shaft and clutch
damage.
See your Owner’s
Manual.
7079780
MANUFACTURED
BY: POLARIS IND
DATE:
VIN:
THIS VEHICLE IS AN ALL TERRAIN VEHICLE AND
IS NOT INTENDED FOR USE ON PUBLIC ROADS.
PRINTED IN U.S.A. 7077185
CE VÉHICULE EST UN VÉHICULE TOUT TERRAIN
QUI NiEST PAS DESTINÉ À ÊTRE UTILISÉ SUR
LES CHEMINS PUBLICS.
7079604
Reverse Speed is
limited.
Reverse override is
controlled by the
override switch.
See your Owner’s
Manual.
OVERRIDE
SWITCH
7079906
AWD Models
2WD Models
Chain Freeplay Is Important.
Adjust Freeplay to 3/16″ - 3/8″
DO NOT Overtension. See
Owner’s Manual.
Torque Nut on Eccentric Bolts:
To 30 Ft. Lbs.(For models
without a hitch).
To 60 Ft. Lbs. (For models with
a hitch.
7078572
WARNING
Pushing reverse
override button
may cause
sudden in-
creases in pow-
er and traction if
too much
throttle is ap-
plied. Loss of
control or for-
ward flipover
may result, es-
pecially in
AWD. See Own-
er’s Manual.
NOTE: Your ATV will not have all of the decals shown on this page.
Decals vary depending on the model you own.
Canadian Certification Decal