Pioneer DRM-604X - Manual (Page 38)

Using CLD Remote
There is one utility program included with the Macintosh Pioneer CD-ROM drivers.
This is CLD Remote, a remote control program for the Macintosh that can be used to
control CD Audio discs.
When CLD Remote is opened, the controller screen for CD-ROM changer appears if
the drivers are installed, the CD-ROM Changer is attached to the Macintosh via SCSI
and powered ON. You will see this screen:
Here are descriptions of the CLD REMOTE indicators and control panel:
A — This indicates the title of the Audio CD and Track number currently playing.
B — These numbers indicate the SCSI ID (1-6) of the drive; the disc tray in which
the active Audio CD is in (1-6); the track number that is currently playing; and the
elapsed time of the track, if DISC TIME is selected under the FILE MENU.
Note: If Absolute Time is selected in the File Menu, this time number will indicate
total time that has elapsed during playback of the CD.
C — The top bar indicates the elapsed time within the track (Disc Time) and the
bottom bar indicates the elapsed time within the entire CD (Absolute Time).
D — This is a volume control. (Descriptions are continued on next page.)
MACINTOSH Driver Installation Chapter 4
Owner’s Manual / Software Driver Installation Guide 4-7
Figure 23 - CLD Menu Icon
Figure 24 - MACINTOSH CLD Remote
A
B
C
F
E
D