Philips wk10295 - Manual (Page 11)

10 EN
4 Update VIBE
VIBE is controlled by an internal program called
firmware. Newer versions of the firmware may
have been released after you have purchased
VIBE.
The software program called Philips Songbird
can use your computer to check for firmware
updates that are available on the Internet.
Install Philips Songbird on your computer
(see chapter Install software) and follow the
instructions to update (see chapter Manually
verify / update the firmware).
Note
Your music files are not affected by a firmware •
update.
Manually verify / update the
firmware
1
Ensure that your computer is connected
to the Internet.
2
Connect VIBE to the computer (see
section Connect and charge for
instructions).
3
On your computer, click Start >
Programs > Philips > Philips Songbird to
launch the Philips Songbird application.
4
Click VIBE in the Player pane. Then, select
Tools > Check for updated firmware in
the pop-up window.
» Philips Songbird checks for updates
and installs new firmware from the
Internet, if available.
5
Follow the on-screen instructions to
update the firmware of VIBE.
6
Wait until the update is completed, then
disconnect VIBE from the computer.
VIBE restarts after the firmware is »
updated and is ready for use again.