Philips wearable digital camcorder - Manual (Page 19)

17
English
Firmware Upgrades
For the best interaction between your camcorder and your computer, check
www.philips.com/support for the latest upgrades available.
1 You may need to enter the model number, e.g. key019, to access the upgrade
file. Make sure you save the file(s) in a folder on your computer. Unzip them
before you install the upgrade.
2 Connect your camcorder to your computer. Copy the extracted firmware
file into the root directory of your camcorder. After file transfer completes,
disconnect camcorder safely from your computer by clicking
on the task bar to
avoid file error. WINDOWS 98SE users: there is no icon. Simply disconnect
camcorder after file transfer completes.
3 Press and hold Shutter and turn the Mode dial to power ON. Your camcorder
will start upgrading. During firmware upgrade, both LEDs will blink.
4 Turn the Mode dial to power OFF when the LEDs stop blinking.
Firmware upgrade is complete and camcorder is ready for use.
key19_eng14apr.qxd 28/4/04 14:26 Page 17