Plantronics Voyager 510 User Manual

Page 4

Before using your headset for the first time, you must pair it with your Bluetooth phone or

device. Be sure the headset is fully charged. For set up and pairing instructions with Bluetooth

devices other than mobile phones, please consult your Bluetooth device user guide.

Turn on both devices.

POWERING

PAIRING

Powering Headset

Powering USB Bluetooth Adapter

Pairing Headset with Bluetooth Phone

The USB Bluetooth adapter is automatically powered on upon inserting into the USB port

of the computer. If your USB port on the computer is hard to access, you can use the USB

extension cable.

NOTE: The USB Bluetooth adapter is automatically active with the current paired headset upon

powering on.

Press and hold the power/mute button

for three seconds to turn the headset

on or off.

The indicator light flashes blue when the

headset is on.

The indicator light will flash red when

the battery becomes low.

1. Simultaneously press the listen volume

adjust button marked + (volume up)

and the call control button. Release the

buttons when the indicator light begins

to flash red then blue.

2. While the headset is flashing red and

blue, use the phone menu to search

for Bluetooth devices and select “510

Plantronics”.

3. When prompted for passkey enter

0000. The headset will flash blue when

paired successfully.