Technical assistance, Warranty and service, Regulatory notices – Plantronics Voyager 510 User Manual

Page 11

73046-01 (3/06)

and Sound Innovation are trademarks or registered trademarks of Plantronics, Inc. The Bluetooth name and

the Bluetooth trademarks are owned by Bluetooth SIG, Inc. and are used by Plantronics, Inc. under license.

Windows is either a registered trademark or a trademark of Microsoft Corporation in the United States and/

or other countries. All other trademarks are the property of their respective owners. Patents U.S. 5,210,791;

6,923,688; D512,984; Australia 303054; EM 293964-0004-0006 and Patents Pending.

Plantronics, Inc.
345 Encinal Street
Santa Cruz, CA 95060 USA
www.plantronics.com

S O U N D I N N OVAT I O N

TECHNICAL ASSISTANCE

Visit our Web site at www.plantronics.com/support for technical support including

frequently asked questions, compatibility and accessibility information. The Plantronics

Technical Assistance Center (TAC) is also ready to assist you in the U.S. at 866-363-BLUE

(2583) and in Canada at (800) 540-8363.

WARRANTY AND SERVICE

LIMITED WARRANTY for Plantronics Non-commercial Products Purchased in the United

States and Canada.
• This warranty covers defects in materials and workmanship of Non-commercial

Products manufactured, sold or certified by Plantronics which were purchased and used

in the United States and Canada.

• This warranty lasts for one year from the date of purchase of the Products.
• This warranty extends to you only if you are the end user with the original purchase

receipt.

• We will, at our option, repair or replace the Products that do not conform to

the warranty. We may use functionally equivalent reconditioned/refurbished/

remanufactured/pre-owned or new Products or parts.

• To obtain service, contact Plantronics in the United States at (866) 363-BLUE (2583)

and in Canada at (800) 540-8363. If you need additional information, please contact our

service centers at the numbers provided.

• THIS IS PLANTRONICS’ COMPLETE WARRANTY FOR THE PRODUCTS.
• This warranty gives you specific legal rights, and you may also have other rights which

vary from state to state or province to province. Please contact your dealer or our

service center for the full details of our limited warranty, including items not covered by

this limited warranty.

REGULATORY NOTICES

FCC REQUIREMENTS PART 15

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two

conditions:

1. This device may not cause harmful interference, and

2. This device must accept any interference received, including interference that may cause

undesired operation.

This equipment has been tested and found to comply with the limits for a Class B digital device,

pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection

against harmful interference in a residential installation. This equipment generates, uses,

and can radiate radio frequency energy and, if not installed and used in accordance with the

instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If

this equipment does cause harmful interference to radio or television reception which can be

determined by turning the radio or television off and on, the user is encouraged to try to correct

interference by one or more of the following measures:

1. Reorient or relocate the receiving antenna.

2. Increase the separation between the equipment and receiver.

3. Connect the equipment into an outlet on another circuit.

4. Consult the dealer or an experienced radio/TV technician for help.

NOTE:

Modifications not expressly approved by Plantronics, Inc. could void the user’s authority to

operate the equipment.

FCC REGISTRATION INFORMATION - Part 68

This equipment complies with Part 68 of the FCC rules and the requirements adopted by ACTA.

On the exterior of this equipment is a label that contains a product identifier in the format US:

AAAEQ##TXXXX. If requested, this information must be provided to your telephone company.

A plug and jack used to connect this equipment to the premises wiring and telephone network

must comply with the applicable FCC Part 68 rules and requirements adopted by ACTA. A

compliant telephone cord and modular plug is provided with this product. It is designed to be

connected to a compatible jack that is also compliant. See installation instructions for details.

The REN is useful to determine the quantity of devices you may connect to your telephone line.

Excessive RENs on a telephone line may result in the devices not ringing in response to an

incoming call. In most, but not all areas, the sum of the RENs should not exceed five (5.0). To be

certain of the number of devices you may connect to your line, as determined by the REN, contact

your local telephone company. For product approved after July 23, 2001, the REN for this product

is part of the product identifier that has the format US:AAAEQ##TXXXX. The digits represented

by ### are the REN without the decimal point. (For example, 03 represents a REN of 0.3.) For

earlier producers, the REN is separately shown on the label.

If this telephone equipment causes harm to the telephone network, the telephone company will

notify you in advance that temporary discontinuance of service may be required. But if advance

notice isn’t practical, the telephone company will notify the customer as soon as possible. Also,

you will be advised of your right to file a complaint with the FCC if you believe it is necessary.

The telephone company may make changes in its facilities, equipment, operations, or procedures

that could affect the proper functioning of your equipment. If they do, you will be notified in

advance in order for you to make necessary modifications to maintain uninterrupted service.

If trouble is experienced with this unit, for repair or warranty information, please contact

customer service at (800) 544-4660. If the equipment is causing harm to the network, the

telephone company may request that you disconnect the equipment until the problem is resolved.

DO NOT DISASSEMBLE THIS EQUIPMENT: It does not contain any user serviceable components.

We recommend the installation of an AC surge arrester in the AC outlet to which this equipment

is connected. Telephone companies report that electrical surges, typically lighting transients, are

very destructive to customer terminal equipment connected to AC power sources.

EXPOSURE TO RF RADIATION

The internal wireless radio operates within the guidelines found in radio frequency safety

standards and recommendations, which reflect the consensus of the scientific community.

Independent studies have shown that the internal wireless radio is safe for use by consumers.

Visit www.plantronics.com for more information.

INDUSTRY CANADA NOTICE

Radio Equipment

Operation of this device is subject to the following two conditions: (1) this device may not cause

interference, and (2) this device must accept any interference, including interference that may

cause undesired operation of the device.

This product meets the applicable Industry Canada technical specifications of the RSS-213 Issue 2.

The Ringer Equivalence Number is an indication of the maximum number of devices allowed

to be connected to a telephone interface. The termination on an interface may consist of any

combination of devices subject only to the requirement that the sum of all RENs of all of the

devices does not exceed five.