Getting started 01, Listening to other sources, Using the wireless speaker system – Pioneer XV-DV535 User Manual
Page 10: Improving poor fm reception, Listening to station presets
Getting started
01
10
En
Improving poor FM reception
If you’re listening to an FM station in stereo but
the reception is weak, you can improve the
sound quality by switching to mono.
1
Tune to an FM radio station then press
SYSTEM SETUP
.
2
Use
/
to choose ‘FM Mode?’ then
press
ENTER
.
3
Use
/
to select ‘FM Mono’ then press
ENTER
.
The mono indicator (
) lights when the tuner
is in mono reception mode.
Select
FM Auto
above to switch back to auto-
stereo mode (the stereo indicator (
) lights
when receiving a stereo broadcast).
Memorizing stations
You can save up to 30 station presets so that
you always have easy access to your favorite
stations without having to tune in manually
each time
1
.
1
Tune to an AM or FM radio station.
For the FM band, select mono or auto-stereo
reception as necessary. This setting is saved
along with the preset.
2
Press
SYSTEM SETUP
.
3
Use
/
to choose ‘St. Mem?’ then press
ENTER
.
4
Use
/
to select the station preset you
want then press
ENTER
.
Listening to station presets
1
Make sure the
TUNER
function is selected.
2
Use the
ST +/–
buttons to select a station
preset.
• You can also use the number buttons to do
this.
Listening to other sources
You can connect up to three external sources
(TV, satellite receiver, etc.) to this system,
including one digital source. See also
Connecting auxiliary components
on page 30.
1
Make sure that the external source (TV,
satellite receiver, etc.) is switched on.
2
Select the source you want to listen to.
• If you’re using the remote, press
TV
to
select the
TV IN
input, or use the
LINE
(
L1/
L2
) button to select
LINE 1
or
LINE 2
input.
2
3
If necessary, start playback of the source.
Tip
• If an auxiliary source is producing
unpleasant distortion from the speakers,
you can reduce the signal level (connected
to the
LINE 1
analog inputs) by switching
on the attenuator. See
Optional system
settings
on page 39 to do this.
Using the wireless speaker
system
The wireless speaker supplied with your
system can be used for multichannel sound
with your main setup, or for stereo sound at a
second listening position.
Note
1 If the system is unplugged, saved stations will remain for several days, after which you’ll have to save them again.
2 When you press
TV
,
TV ATT
shows in the display. Pressing
LINE
switches between
L1 ATT
(analog) and
LINE2
(digital).
L1/L2
CD
FM/AM
DVD
TUNER
TV
LINE
FRONT
STANDBY/ON
CD
FM/AM
OPEN CLOSE
DVD
TUNER
TV
LINE
L1/L2
0
8
WIRELESS
XV-DV535_IPPAN.book 10 ページ ２００５年２月２３日 水曜日 午後２時５６分