Panasonic PV-D4761 - Manual (Page 24)

24 For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : [email protected]
Timer Recording
ADD/DLT
Press PROG/VCR+ button*
to display “SET PROGRAM.”
Press PROG/VCR+ button
to end programming.
4
3
1
DAILY
13
1 31 12
SELECT /
Selection Order
WEEKLY
(SAT)
WEEKLY
(MON)
WEEKLY
(SUN)
14
Example
Today
2) To set remaining items,
press
to select and
press SET
to set START/ STOP times,
CH(channel) or
LINE input (p. 39), and
tape speed (SP, LP, SLP).
Press PROG/VCR+ button
to exit.
To Enter More Programs,
press
to select and
press SET
to set an unused program
number and repeat step 3.
Or
SET
PROG/
VCR+
2 Press
to select
“TIMER PROGRAMMING” and
press SET
to display Program screen.
SELECT
T I MER PROGRAMM I NG
VCR Plus + PROGRAMMING
SELECT : SET : SET
EXIT : PROG
SET PROGRAM
SE SELE CT START START DAT ATE
13 13 SUN SUN --:-- --:-- --:-- --:-- -- --
TODAY
DATE START STOP CH
SLP
SELECT :
SET : SET
END : PROG
- - - - - - - - -- - - - - - - -- - - - - - -
P DT START STOP CH SPD
1 1 13 10 13 10 : 00 00 P 12 12 : 00 00 P 02 SP SP
2 -- -- : -- -- : -- -- --
3 -- -- : -- -- : -- -- --
4 -- -- : -- -- : -- -- --
CANCEL : ADD / DLT
SELECT 1-8 :
ENTER : SET
EXIT : PROG
Ready Checklist
All connections are made (pp. 12 ~ 15).
TV and DECK are plugged in.
Clock set correctly.
Tape has rec.tab. (p. 6)
Remote is in VCR mode. (Press VCR.)
Sufficient tape remaining for rec time.
1) To set record DATE,
press to select:
1~31= one time, or
DAILY= MON ~ FRI, or
WEEKLY= same time
each week, and
press SET.
• See selection order left.
VCR REC Indicator
VCR mode Indicator
A
M
VCR
VCR REC
DVD
ANGLE
VCR Hi-Fi TIMER
•
•
•
•
Multi Function Display
• The “Timer” Indicator lights up on DECK.
• You can do Timer Recording either power off or power on.
• “TIMER REC WILL START SOON” appears on-screen for 2 minutes
before Timer Recording start. If DECK is in DVD mode, no message
appears, but the VCR REC Indicator, the VCR mode Indicator and
“REC” will flash on Multi Function Display.
TIMER Indicator