beautypg.com

Philips AJ300D User Manual

Page 7

background image

BASIC OPERATION.

Switching on the system
• Press POWER.

™ The system will switch to the last selected source.

• Press TUNER/AUX or DOCK.

™ The system will switch to the selected source.

Switching the system to standby mode
• In any source mode, press POWER.

Switching off the volume temporarily
Press MUTE on the remote control to stop sound play-back instantly.
™ Playback will continue without sound and the display shows MUTE .
• To start sound playback you can:

– press MUTE again;
– adjust the volume controls;
– change source.

Illumination brightness
Press REPEAT ALARM /

BRIGHTNESS CONTROL

once or more.

• The brightness of the display can be adjusted:

Bright

Low

Off

Bright .

SETTING THE CLOCK AND DATE

1. In any mode, press and hold TIME SET until clock digits flashes.
2. Press

2; to select 12 Hours/ 24 Hours mode.

3. Hold down or press

¡1 / 2™ repeatedly to set and adjust the hours.

4. Press TIME SET to confirm.

™ The clock digits for the minutes flash.

5. Repeat the steps 3 - 4 until you complete all the other settings for minutes,

year, month and days.

IFU_AJ300D_eur_eng 2006.11.9 11:04 Page 7