Philips AJ300D - Manual (Page 5)

9 MUTE
– switches playback sound off and on.
0 Display
– shows clock/alarm times and status of the set
! Dock connector (30 pins)
– connects iPod/Philips GoGear player
@ ALM 2
–
activates/confirm ALARM 2 time setting
– displays ALARM 2 time
– switches off ALARM 2 time
# REPEAT ALARM /
BRIGHTNESS CONTROL
– switches off the alarm for a 9 minute period
– changes the brightness of the display illumination
$ POWER jack
– socket for AC/DC 18V adapter
% Pigtail – improves FM reception
^ ALM 1
–
activates/confirm ALARM 1 time setting
– displays ALARM 1 time
– switches off ALARM 1 time
& TIME SET
– activates/confirm clock time/date setting
* (Wake-up mode) DOCK • BUZZER • TUNER
– selects alarm mode: dock, buzzer or radio
( AUX IN jack (3.5 mm)
– connects to external audio source
) RESET
– clears clock time setting
POWER SUPPLY
Mains adapter
1 Connect the mains adapter to the set's DC 18V socket and to the power socket.
Helpful hints: To avoid damage to the set, use only the adapter supplied!
The type plate is located on the bottom of the set.
IFU_AJ300D_eur_eng 2006.11.9 11:04 Page 5