Philips AJ300D - Manual (Page 12)

charge the iPod/GoGear in the standby mode and power-on mode of AJ300D.
SLEEP
This set has a built-in sleep timer, which enables the radio to be automatically
switched off after a set period of time. There are five sleep time options.
Setting and switching off SLEEP
1 Set your timer by pressing SLEEP repeatedly until the desired timer option appears.
™ Selections are follows (time in minute):
120
=90=60=30=15=OFF=120
2 The set will turn off automatically at the selected time.
3 To cancel sleep, press either:
– POWER
– SLEEP once or more until SLEEP disappears from the display.
Reset
Should your set receive external interference e.g. static electricity from carpets, thun-
derstorms, etc. RESET allows you to clear all previous settings and start up again.
• Use a ballpoint pen to press the RESET hole found on the bottom of the set.
CONNECTING AN EXTERNAL DEVICE
You can listen to the sound of the connected external device through your
AJ300D’s speakers.
1 Press TUNER/AUX twice to select AUX mode.
2 Use the supplied AUX-IN cable to connect AJ300D’s AUX IN jack to an AUDIO
OUT or headphone jack on an external equipment (such as CD player, or VCR).
Notes:
– In AUX mode, if the AUX-IN cable is not connected for 15 minutes, AJ300D will
come to standby.
IFU_AJ300D_eur_eng 2006.11.9 11:04 Page 12