Panasonic KX-FP195 - Manual (Page 53)

1 2 3
4 5 6
7 8 9
0
53
Special Settings
Signaling your pager that you have received a fax
document
This feature allows your unit to call your pager when your unit receives a fax message.
1 Press (MENU) .
Display:
2 Press K , then G @ .
3 Press (START/COPY/SET) .
4 Press or to select “ON”.
¡ If this feature is not required, select “OFF”.
5 Press (START/COPY/SET) .
6 Enter your pager phone number.
¡ If this feature does not work properly, press
(REDIAL/PAUSE) more than one time at the end
of your pager phone number to extend the paging
time.
If you wish to display a message on your pager,
enter the message after your pager phone
number and
(REDIAL/PAUSE) .
Programming methods may vary depending on
the pager company. Contact your pager company
for details.
¡ You can enter a total of 46 digits and/or pauses.
7 Press (START/COPY/SET) .
8 Press (MENU) .
Note:
¡ This feature is not available when the receive mode is
set to the TEL mode.
NO.=
MODE=ON [ Ÿÿ ]
MODE=OFF [ Ÿÿ ]
FAX PAGER
SYSTEM SET UP
(MENU) Dial keypad
(START/COPY/SET)
(REDIAL/PAUSE)