Troubleshooting, 27 problem possible cause solution – Philips AZT9240 User Manual
Page 24
TROUBLESHOOTING
27
Problem Possible
cause Solution
No sound or
PAUSE is activated.
Press
2;.
bad sound quality
Loose, wrong or dirty
Check and clean
connections connections.
Volume is not adjusted.
Adjust the volume.
Malfunctions due to vicinity
Keep the player away from
of active mobile phones
active mobile phones.
Strong magnetic fields near
Change the player’s position
the player
or connections.
In-car use
cassette adapter is
Insert the cassette adapter
inserted incorrectly.
correctly.
Temperature inside the car
Let the player adjust to the
is too high/low.
temperature.
Cigarette lighter socket
Clean the cigarette
is dirty.
lighter socket.
Wrong playback direction of the Change the autoreverse
car cassette player’s
direction.
autoreverse feature
Poor radio reception Weak radio signal
Direct the antenna for
optimum reception.
Interference caused by electric
Keep the player away from
equipment like TVs, computers, electric equipment.
engines etc.
Alarm does
Alarm time is not set/alarm is
Set the alarm time/activate
not work.
not activated.
the alarm.
Malfunction, loss of Continued operation with weak Change batteries, readjust
time settings
batteries settings.
English
If a fault occurs, first check the points listed, before taking the set for repair.
If you are unable to solve a problem by following these hints, consult your dealer or
service centre.
AZT9240/01 eng 23/2/01 17:28 Page 27