Philips AZT9240 - Manual (Page 23)

TROUBLESHOOTING
26
Problem Possible cause Solution
No power, Batteries
playback does Batteries inserted incorrectly Insert the batteries
not start correctly.
Batteries are empty. Change the batteries.
Contact pins are dirty. Clean them with a cloth.
Mains adapter
Loose connection
Connect the adapter
securely.
In-car use
Cigarette lighter is not powered Switch on ignition or insert
when ignition is off.
batteries.
nF dISC CD-RW (CD-R) is not recorded Use FINALIZE on the
indication properly. CD recorder to complete
the recording.
no dISC The CD is badly Replace or clean the CD.
indication scratched or dirty.
CD is not or incorrectly inserted. Insert a CD, label upwards.
The laser lens is steamed up. Wait until the lens has
cleared.
HoLd indication HOLD is activated. Deactivate HOLD.
and/or no reaction Electrostatic discharge Disconnect the set from
to controls power supply or take out
the batteries for
a few seconds.
The CD skips tracks. The CD is damaged or dirty. Replace or clean the CD.
RESUME , SHUFFLE or PROGRAM is Switch RESUME , SHUFFLE
active. or PROGRAM off.
English
WARNING
Under no circumstances should you try to repair the set yourself as this
will invalidate the guarantee.
AZT9240/01 eng 23/2/01 17:28 Page 26