Philips AZT9240 - Manual (Page 10)

CD PLAY
13
• If a recordable CD (CD-R) or a rewritable CD (CD-RW) is not recorded
properly, nF dISC is displayed. In that case use FINALIZE on your
CD recorder to complete the recording.
• If you want to play a rewritable CD (CD-RW), it takes 3–15 seconds for
sound reproduction to start once you have pressed 2;.
• Playback will stop if you open the CD lid.
• While the CD is read, 1 -:- is displayed.
Volume adjustment
• Adjust the volume by using VOL
E.
Bass adjustment
You can choose between the bass enhancement levels
dbb1 and dbb2.
1 Press DIGITAL DBB as often as necessary to select
the desired bass intensity.
y dbb1 or dbb2 is displayed for 2 seconds and
is shown.
2 To switch dbb1 or dbb2 off, press DIGITAL DBB
repeatedly.
y goes off.
DIGIT
AL DBB
0
VOL.
Volume and bass
Playback information
English
This set complies with the radio interference requirements of the
European Community.
AZT9240/01 eng 23/2/01 17:28 Page 13