Installing the batteries, Installing a battery, Replacing a battery – Panasonic KX-TD1232CE User Manual
Page 8

8
Installing the Batteries
You need to charge the battery before initial use and when the bat-
tery strength becomes low.
When the battery strength becomes low, “
” flashes or beep
tones sound every five seconds. During a conversation, the call
will hang up automatically within three minutes. If idle or in the
programming status, “
BATTERY EMPTY
” is displayed and the key
operation is canceled. In these cases, recharge the battery or
replace with a fully charged optional spare battery.
Standard Battery Life
If your Panasonic battery is fully charged [provided 25°C (77°F)]:
Note:
– The battery is used while the portable station’s power is ON.
– Battery life may vary depending on usage conditions and ambient tem-
perature.
– Please use only a Panasonic battery.
Installing a Battery
Hook the bottom of the battery on the
portable station, and place the battery in the
portable station until you hear a click.
Replacing a Battery
Set the Power switch to OFF to prevent
memory loss.
While pressing the open-button, remove the
battery.
While in use (Talk mode)
While not in use (Stand-by mode)
Up to about 10 hours
Up to about 100 hours
1
1
2
INT'
F1
F2
F3
CLR
C
OFF