Editing, Advanced operations, Assembly editing – Panasonic AG-2570 User Manual

Page 35

Advanced Operations

Editing

Assembly Editing

This function can be used to make up an edited
tape from other recordings or video sources.
A new scene can be added to the end of
previous one.

Preparations
– Connect a movie camera or another VCR to

this VCR as shown.

– Insert a recorded cassette tape with an intact

erasure prevention tab.

– Select the audio source required by pressing

[INPUT SELECT] to set AV input.

Operations
1 Press [PAUSE/STILL].

2 Search for the end of the previous recording

by using Jog Dial and Shuttle Ring.

3 Press [REC/OTR] to switch the VCR from

the pause mode to the recording standby
mode.

4 Start the new recording by pressing

[PAUSE/STILL] again.

5 Press [STOP] to stop recording.

Note:
– The new sound will be recorded on both the

normal and Hi-Fi sound tracks, only
monaural sound recording is possible on the
normal sound tracks.

Recording VCR

AV1
(AUDIO IN/VIDEO IN)