Philips FW-V28 - Manual (Page 10)

3139 116 20021
10
English § OSD (ON SCREEN DISPLAY)
–
to switch on or off the on screen
display on the TV screen.
≥ INCREDIBLE SURROUND (not
applicable for this model).
– to switch on or off the surround sound
effect.
• ZOOM
–
to enlarge a still picture on the TV
screen
(for VCD operation only).
ª VOCAL
–
to fade out the vocal of the original
song during VCD playback or to switch
between mono or stereo mode during
audio disc playback
(for VCD operation
only).
º KEY CONTROL ( I È i )
–
to change the key to suit your vocal
range
(for VCD operation only).
I ................. to decrease vocal key
level.
È .................... to restore vocal key to
original setting.
i ................... to increase vocal key
level.
⁄ ECHO -/+
–
to adjust the echo level for karaoke
(for VCD operation only).
¤ RESUME
–
to continue playback again from
where you have stopped. Only when
PBC mode is switched off
(for VCD
operation only).
‹ SLOW
–
to watch a VCD at a slower speed.
There are 3 modes of selection
(for
VCD operation only).
› A - B
–
to playback a certain scene or passage
of a disc repeatedly.
fi DIGEST
–
to scan through a VCD or a particular
track. There are 4 modes of selection
(for VCD operation only).
fl MUTE
–
to switch off the sound temporarily.
‡ DIGIT 0 – 9
(numbers consisting of two figures
must be keyed in within 2 seconds.)
for VCD with PBC on ..........................
to select an entry level.
for VCD/CD…to key in a disc track to
start playback or
...................... to select another track
during playback or
...................... to select a track for
programming.
° B
–
to switch the system to standby mode.
Notes for remote control:
– First select the source you wish to
control by pressing one of the
source select keys on the remote
control (e.g. VCD, TUNER, etc.).
– Then select the desired function
(Й, н, л, etc.).
CONTROLS OPERATING THE SYSTEM
Important:
Before you operate the system,
complete the preparation procedures.
Demonstration mode
The system has a demonstration mode that
shows the various features offered by the
system.
When the system is switched
on for the first time, the demonstration
mode will start automatically.
Notes:
– During the demonstration, if you press
any source (or standby-on) button, the
system will switch to the respective
mode (or standby).
– When the system is switched to standby
mode, the demonstration will resume 5
seconds later.
To stop the demonstration mode
• Press and hold Ç
(on the system only)
for 5 seconds when the system is in
demonstration mode.
™ The demonstration will stop.
™ "DEMO OFF" is displayed.
™ The system will switch to standby
mode.
Note:
– Even though the AC power cord is
removed from and reconnected to the
wall socket, the demonstration will
remain off until it is switched on again.
To start the demonstration mode
• Press and hold Ç
(on the system only)
for 5 seconds when the system is in
standby mode.
™ The demonstration will begin.
DIGITAL
SOUND
CONTROL
STANDBY-ON
PROGRAM DIM
VCD MINI HIFI SYSTEM
C D 1 • 2 • 3 BAND TAPE 1 • 2
TAPE VCD TUNER AUX
PRESET ▲ ▲ TUNING ▲ ▲ ▲ ▲
STOP• CLEAR SEARCH PLAY• PAUSE PREV NEXT
3 CD ROTARY CHANGER SYSTEM •
CD REWRITABLE COMPATIBLE •
CD SYNCHRO RECORDING •
D B B
VIDEO
O P TI M AL JA ZZ
R O CK
TE C H N O
DSC RECORD DUBBING A.REPLAY
VOLUME
MICROPHONE - LEVEL
PAL/NTSC
CLOCK•TIMER RETURN PBC
Untitled-1 31/05/2001, 11:35 AM 10