Taking underwater pictures (underwater mode) – Pentax Optio WP User Manual
Page 72
70
4
Tak
ing Pi
cture
s
B
This camera has a waterproof capability equivalent to JIS Class 8
protection (IPX8) and can be used to take pictures at a depth of 1.5 m
continuously for 30 minutes.
Use the Underwater mode to take underwater pictures that capture the
blueness of the sea.
1
Press the four-way controller (3) in A mode.
The Capture Mode Palette appears.
2
Use the four-way controller (2345) to select B
(Underwater).
3
Press the 4 button.
The Underwater mode is selected and the camera returns to capture
status.
4
Press the shutter release button halfway.
The focus frame turns green if the subject is in focus.
5
Press the shutter release button fully.
The picture is taken.
Taking Underwater Pictures (Underwater Mode)
• Before taking pictures underwater, make sure that there is no dirt
or sand on the waterproof packing of the battery/card cover and
check that the cover is securely locked. (1p.23)
• Before opening the battery/card cover after using the camera
underwater, make sure that there is no water, dirt or sand on the
battery/card cover or anywhere on the camera. Wipe the camera
before opening the cover.
4, 5
1, 2
3