Panasonic MC-UL975 - Manual (Page 9)

Tabla de contenido Table des matières
Renseignements importants .......................... 3
Importantes mesures de sécurité .................. 6
Nomenclature .............................................. 10,11
Tableau des caractéristiques .......................... 11
Assemblage .................................................... 13
Montage des composantes ........................ 13
Caractéristiques ............................................ 15
Fonction AEROBLAST ................................ 15
Détecteur de poussière .............................. 17
Tête d’aspiration autoréglable .................... 17
Protecteur de surcharge.............................. 19
Nettoyage latéral ........................................ 19
Fonctionnement .............................................. 21
Ajustement de la longueur de la poignée .. 21
Crochet de rangement du cordon .............. 21
Encoche de verrou ...................................... 21
Cordon d’alimentation ................................ 23
Interrupteur.................................................. 23
Sélecteur tapis/plancher.............................. 23
Réglage de l'inclinaison du boîtier .............. 25
Poignée ajustable ........................................ 27
Utilisation des accessoires.......................... 29
Accessoires ................................................ 31
Entretien de l’aspirateur .................................. 33
Nettoyage du bac à poussière .................... 33
Nettoyage du filtre primaire HEPA .............. 37
Nettoyage du préfiltre .................................. 39
Remplacement du filtre
d’évacuation HEPA...................................... 41
Nettoyage des cellules optiques du
détecteur de poussière................................ 43
Protecteur thermique .................................. 45
Enlèvement et installation de la
plaque inférieure ........................................ 47
Remplacement de la courroie .................... 49
Remplacement de l’ampoule de la lampe .. 51
Nettoyage du boîtier et des accessoires .... 53
Nettoyage de l’agitateur .............................. 53
Dégagement des
obstructions ................................................ 55
Guide de dépannage ...................................... 57
Garantie .......................................................... 61
Service après-vente ........................................ 64
Información para el consumidor .................... 4
Instrucciones importantes de seguridad ........ 7
Identificación de piezas .............................. 10,11
Diagrama de características .......................... 11
Montaje............................................................ 13
Colocación del components ...................... 13
Características .............................................. 15
AEROBLAST .............................................. 15
Indicador de polvo ...................................... 17
Boquilla de ajuste automático .................... 17
Protector contra sobrecargas...................... 19
Limpieza para orillas .................................. 19
Para operar la aspiradora................................ 21
Ajustando la longitud de la manija .............. 21
Sujetador del cordón .................................. 21
Hendidura de fijación .................................. 21
Cordón eléctrico ........................................ 23
Interruptor de encendido-apagado ............ 23
Selector alfombra-piso ................................ 23
Liberacion de boquilla ................................ 25
Manija ajustable .......................................... 27
Utilización de accesorios .......................... 29
Accesorios .................................................. 31
Cuidado de rutina de la aspiradora ................ 33
Limpieza del cubo basura .......................... 33
Limpieza del filtro de HEPA ........................ 37
Limpieza del pre-filtro.................................. 39
Cambio del filtro de escape HEPA .............. 41
Limpieza la basura de basura en
sensor optico .............................................. 43
Protector termal .......................................... 45
Cambiar y insertar de la
base inferior ................................................ 47
Cambio de la correa.................................... 49
Cambio de la bombilla ................................ 51
Limpieza del exterior y de los herramientas .. 53
Limpieza del agitador .................................. 53
Quitando los residuos de basura
en los conductos ........................................ 55
Antes de pedir servicio.................................... 58
Garantía .......................................................... 62
Cuando necesita servicio .............................. 64
- 9 - - 56 -
BEFORE REQUESTING SERVICE
Review this chart to find do-it-yourself solutions for minor performance
problems. Any service needed, other than those described in these
Operating Instructions, should be performed by an authorized service
representative.
WARNING
Electrical Shock or Personal Injury Hazard
Disconnect the electrical supply before servicing or cleaning the vacuum cleaner.
Failure to do so could result in electrical shock or personal injury from vacuum
cleaner suddenly starting.
Vacuum Cleaner 1. Unplugged at wall outlet. 1. Plug in firmly, turn on vacuum cleaner.
won’t run. 2. Tripped circuit breaker/blown fuse 2. Reset circuit breaker or replace
at household service panel. fuse.
3. Thermal protector tripped. 3. Unplug vacuum cleaner, allow to cool
and thermal protector will reset itself.
Poor job of dirt 1. Full or clogged dust bin. 1. Empty dust bin.
pick up 2. Worn agitator. 2. Take to your nearest Panasonic
Service Center.
3. Clogged nozzle. 3. Check for clogs.
4. Clogged hose. 4. Check for clogs.
5. Hole in hose. 5. Take to your nearest Panasonic
Service Center.
6. Broken belt 6. Replace belt.
7. Motor protection system activated. 7. Check for clogs.
8. Dirty filters. 8. Change primary filter and
exhaust filter.
9. Floor/Tools Selector knob in 9. Check Floor/Tools selector knob
wrong position. position.
Light won’t work. 1. Burned out light bulb. 1. Change light bulb.
Agitator does not turn. 1. Carpet/Bare floor selector in Bare Floor 1. Select CARPET position.
2. Broken belt. 2. Replace belt.
3. Tripped overload protector in 3. Remove any items that may be caught
nozzle. or jammed, then reset. If vacuum
cleaner starts and stops again, clean
agitator and end caps, then reset.
Air flow restricted 1. Attachment use restricts air flow. 1. See ATTACHMENTS.
with attachment use. 2. New carpet fuzz clogged air path. 2. See CLOG REMOVAL and clean
Sound changes. hose.
3. Floor/Tool Selector knob in 3. Check Floor/Tool selector knob
wrong position. position.
Dirt Sensor 1. Dirty optic cells. 1. See CLEANING OPTIC CELLS.
will not work.
AEROBLAST lights stay 1. Dust bin not installed properly. 1. Check dust bin installation.
lit during operation.
PROBLEM POSSIBLE CAUSE POSSIBLE SOLUTION