Philips CCC 092AT - Manual (Page 23)

Remote Control Buttons (cont’d) 23
CH(annel) o o /p p Buttons
Press to scan through the TV/VCR’s available channels.
MEMORY Button
Press to memorize a tape position at which you set the real-time
counter to 0:00:00. Details are on page 41. Or, press to memorize
the start and end positions on a tape when setting up A-B Repeat
Play. Details are on pages 38-39.
MENU Button
Press to display the main menu. You also may use the buttons on
the front panel of the TV/VCR to access the menu. Details are on
page 21.
EJECT Button
Press to eject the tape.
STATUS/EXIT Button
Press to access or remove the status display. Details are on page
25. Press to remove the menu.
STOP/▼ Button
Press to stop the tape. Press to select an item in the menu.
PAUSE/STILL Button
During recording, press to temporarily stop the recording. Press
again to resume recording. Details are on page 30. You cannot
pause a One-Touch Recording.
During tape playback, press to freeze the picture (still). Each time
you press the PAUSE/STILL button, the noise lines will change
position on the screen and the tape will advance slightly. Details
are on page 42.
REW(ind)/{ Button
When tape playback is stopped, press to rewind the tape at high
speed. During tape playback, press to rewind the tape while the
picture stays on the screen. Details are on page 42.
Press to change a setting of a menu item or to return to a previ-
ous menu.
REC(ord)/OTR Button
Press once to start a recording. Details are on page 30. Or, press
repeatedly to start a One-Touch Recording (an immediate timed
recording, 30 minutes to eight hours long) of the channel you are
watching. Details are on page 31.
TRACKING o o /p p Buttons
Press during tape playback to adjust the tracking. Details are on
page 47.