Philips CCC 092AT - Manual (Page 10)

10 Automatic Channel Setup
Although the TV/VCR may automatically memorize the channels
you receive when you turn it on for the first time, you may set up
channels again by following these steps.
1
Press the MENU button.
2
Press the PLAY/▲ button or the STOP/▼ button to select
PRIM. SETUP, then press the F.FWD/B button.
PRIMARY SETUP
> SELECT LANGUAGE
AUTO PROGRAMMING
CH MEMORY REVIEW
VOLUME BAR
[ON]
SET CLOCK
SELECT KL CHOOSE B
TO END PRESS EXIT
3
Press the PLAY/▲ button or the STOP/▼ button to select
AUTO PROGRAMMING, then press the F.FWD/B but-
ton. AUTO CH PROGRAMMING ... will appear on the screen.
The TV/VCR distinguishes between TV channels and cable chan-
nels automatically, and the TV/VCR will memorize its available
channels.
• Line Input mode will always be
channel 00. You cannot delete it.
Line Input Mode (A/V IN) is the
channel to which you set the
TV/VCR when you want to view pro-
gramming from another source. For
example, you could connect a VCR,
camcorder, or DVD Player to the
TV/VCR. Details are on page 32.
• You can not select AUTO PRO-
GRAMMING at step 3 if you are in
Line Input mode.
Helpful Hints
4
Wait for a few minutes. When setup is complete, CHANNELS
ARE SET will appear on the screen. Then the programming of the
lowest memorized channel number will appear on the screen.
Now, when you press the CH(annel) o
o /p p buttons, you will scan
only through channels you receive. You can still select non-memo-
rized channels using the Number buttons.
4 Wait for the TV/VCR to set up
channels.
1
2-3
> PRIM. SETUP
VCR PROGRAM
VCR SETUP
REMINDER
BRIGHTNESS
PICTURE
PRESS B