Philips CCC 092AT - Manual (Page 11)

Automatic Channel Setup (cont’d) 11
4
Press the F.FWD/B button or the REW(ind)/{ button to
select SAVED (to add that channel) or DELETED (to
delete that channel).
Repeat steps 3-4 to add or delete other channels.
5
Press the STATUS/EXIT button.
Programming of the channel you added or deleted will appear.
3
Press the CH(annel) o o /p p buttons or the Number buttons
to select the channel you want to add or delete. The chan-
nel number will appear in the top left corner of the screen. Saved
channel numbers will be yellow. Deleted channel numbers will be
red.
• To review the memorized channels,
follow these steps.
1) Press the MENU button.
2) Press the PLAY/▲ button or the
STOP/▼ button to select PRIM.
SETUP. Press the F.FWD/B button.
3) Press the PLAY/▲ button or the
STOP/▼ button to select CH MEM-
ORY REVIEW. Press the F.FWD/B
button. A list of programmed chan-
nels will appear on the screen.
4) If all the programmed channels
don’t fit on the screen, press the
F.FWD/B button. If you do not press
the F.FWD/B button within 10 sec-
onds, the remaining channels will
appear on the screen. (If there are
no remaining channels, the previous
menu will appear.) Or press the
REW(ind)/{ button to see the previ-
ous screen of channels.
5) Press the STATUS/EXIT button
once or twice.
Helpful Hint
1
Press the MENU button.
2
Press the PLAY/o button or the STOP/p button to select
CHANNEL.
Adding/Deleting Channels
TO ADJUST PRESS { / B
CH23
> CHANNEL
EXIT
PRIM. SETUP
VCR PROGRAM
VCR SETUP
REMINDER
SAVED
> PRIM. SETUP
VCR PROGRAM
VCR SETUP
REMINDER
BRIGHTNESS
PICTURE
PRESS B
TO ADJUST PRESS { / B
CH123
> CHANNEL
EXIT
PRIM. SETUP
VCR PROGRAM
VCR SETUP
REMINDER
SAVED
1
2,4
3
5
If your channel lineup changes, you may want to add newly avail-
able channels or remove channels that are no longer available in
your area. You can use the CH(annel) o
o /p p buttons to scroll
through only the available channels. To add or delete channels
from the TV/VCR’s memory, follow these steps.