Phonebook, Caller id – Panasonic KXTH111 User Manual
Page 70

Useful Information
70
For assistance, please visit http://www.panasonic.com/phonehelp
Phonebook
Caller ID
Problem
Cause/solution
Copying stopped with an
item displayed.
L
The destination handset may have lost communication
with the base unit, or the destination unit user may have
pressed {C} or {s} on the handset or {SP-PHONE}
on the base unit.
The displayed phonebook item was not copied to the
unit. Press {OFF} on the handset or {STOP} on the
base unit. Confirm that the destination unit is not in use
and try again.
Problem
Cause/solution
The handset or base unit
does not display the
caller’s name and/or
phone number.
L
You have not subscribed to Caller ID service. Contact
your telephone service provider to subscribe.
L
If your base unit is connected to any additional
telephone equipment such as a Caller ID box or
cordless telephone jack, disconnect the base unit from
the equipment and plug the base unit directly into the
wall jack.
L
If your base unit is connected to a telephone line with
DSL service, we recommend connecting a noise filter
between the base unit and the telephone line jack.
Contact your DSL provider for details.
L
The name display service may not be available in some
areas. Contact your telephone service provider for
details.
L
Other telephone equipment may be interfering with this
unit. Disconnect the other equipment and try again.
L
The caller requested not to send caller information
(page 27).
L
If a call is being transferred to you, the caller information
is not displayed.
The handset does not
announce the displayed
caller names.
L
The handset’s ringer volume is turned off. Adjust it
(page 37).
L
The Talking Caller ID feature is turned off. Turn it on
(page 40).
L
The ring count for the answering system is set to “2” or
“Toll saver”. Select a different setting (page 50).
The caller list/incoming
phone numbers are not
edited automatically.
L
The Caller ID number auto edit feature is turned off.
Turn it on and try again (page 41).
L
You need to call back the edited number to activate
Caller ID number auto edit.
TH111(e).book Page 70 Thursday, June 8, 2006 10:35 AM