Panasonic KXTH111 - Manual (Page 18)

C
Making/Answering Calls
18 For assistance, please visit http://www.panasonic.com/phonehelp
Making calls
Using the handset
Y
1
Lift the handset and dial the phone
number.
L
To correct a digit, press {CLEAR}.
2
Press {C} or {CALL}.
3
When you finish talking, press {OFF} or
place the handset on the base unit or
charger.
L
If you have registered a cellular
phone to the base unit (page 52),
{
CALL} is not displayed.
Using the speakerphone
1
Lift the handset, dial the phone number,
and press {s}.
L
Speak alternately with the other party.
2
When you finish talking, press {OFF} or
place the handset on the base unit or
charger.
Note:
L
Use the speakerphone in a quiet
environment.
L To switch to the receiver, press {C}.
Adjusting the receiver/speaker volume
Push {^} or {V} while talking.
Making a call using the redial list
The last 10 phone numbers dialed are
stored in the redial list.
1
{
REDIAL}
2
Push {^} or {V} to select the desired
number.
L
To erase the displayed number, press
{
CLEAR}.
3
{C}
PAUSE button (for PBX/long distance
service users)
A pause is sometimes required when
making calls using a PBX or long distance
service. When storing a calling card
access number and/or PIN in the
phonebook, a pause is also needed (page
24).
For example, if you need to dial the line
access number “9” when making outside
calls with a PBX:
1
{ 9} i {PAUSE} i Dial the phone
number.
2
{C}
Note:
L
A 3.5 second pause is inserted each
time {PAUSE} is pressed. Press
repeatedly to insert longer pauses.
TH111(e).book Page 18 Thursday, June 8, 2006 10:35 AM