Using the equalizer 34, Operating this unit, Using the equalizer – Pioneer AVH-P5900D User Manual
Page 34
1
Touch FADER/BALANCE on the audio
function menu.
# When the rear output setting is S.W,
BALANCE will be displayed instead of
FADER/BALANCE. Refer to Setting the rear output
and subwoofer controller on page 42.
2
Touch a or b to adjust front/rear
speaker balance.
Each time you touch a or b it moves the
front/rear speaker balance towards the front or
the rear.
FRONT:15 to REAR:15 is displayed as the
front/rear speaker balance moves from front to
rear.
# FR: 0 is the proper setting when only two
speakers are used.
# When the rear output setting is S.W, you can-
not adjust front/rear speaker balance. Refer to
Setting the rear output and subwoofer controller
on page 42.
3
Touch c or d to adjust left/right speak-
er balance.
Each time you touch c or d it moves the left/
right speaker balance towards the left or the
right.
LEFT:15 to RIGHT:15 is displayed as the left/
right speaker balance moves from left to right.
Using the equalizer
The equalizer lets you adjust the equalization
to match car interior acoustic characteristics
as desired.
Recalling equalizer curves
There are seven stored equalizer curves which
you can easily recall at any time. Here is a list
of the equalizer curves:
Display
Equalizer curve
POWERFUL
Powerful
NATURAL
Natural
VOCAL
Vocal
CUSTOM1
Custom 1
CUSTOM2
Custom 2
FLAT
Flat
SUPER BASS
Super bass
! CUSTOM1 and CUSTOM2 are adjusted
equalizer curves that you create. Adjust-
ments can be made with a 7-band graphic
equalizer.
! When FLAT is selected no supplement or
correction is made to the sound. This is
useful to check the effect of the equalizer
curves by switching alternatively between
FLAT and a set equalizer curve.
% On the normal display, touch EQ to se-
lect the equalizer.
Touch
EQ repeatedly to switch between the fol-
lowing equalizers:
POWERFUL
—NATURAL—VOCAL—
CUSTOM1
—CUSTOM2—FLAT—
SUPER BASS
Adjusting equalizer curves
The factory supplied equalizer curves, with the
exception of
FLAT, can be adjusted to a fine
degree (nuance control).
1
Touch GRAPHIC EQ on the audio func-
tion menu.
2
Touch c or d to select an equalizer
curve.
POWERFUL
—NATURAL—VOCAL—
CUSTOM1
—CUSTOM2—FLAT—
SUPER BASS
Operating this unit
En
34
Section
03