Philips FW-V320/21 - Manual (Page 26)

26
English
3139 115 20852
Recording
STANDBY-ON
PROGRAM DIM
FULL AUTO STOP
PLAYBACK PLAY/ REC
VCD MP3-CD MINI HIFI SYSTEM
C D 1 • 2 • 3 BAND TAPE 1 • 2
STOP•CLEAR PLAY• PAUSE
CDR/VIDEO
RECORD DUBBING A.REPLAY
VOLUME
CLOCK•TIMER RETURN PBC
DEMO STOP
▲ OPEN
TAPE 2
TAPE 1
▲ OPEN
PAL/NTSC
SEARCH•TUNING PREV NEXT PRESET ▲ ▲
MP 3 -CD ALBUM + TITLE +
MICROPHONE - LEVEL
TAPE VCD TUNER AUX
D B
B
V
E
C
D
S
C
T E C H N O
R O C K
J A Z Z
O P T IM
A L
INCREDIBLE
SURROUND
JOG
CONTROL
Notes:
– If you do not intend to record via the
microphone, unplug the microphone to avoid
accidental mixing with other recording source.
– For recording, use only tape of IEC type I
(normal tape).
– The tape is secured at both ends with leader
tape. At the beginning and end of tape, nothing
will be recorded for six to seven seconds.
– The recording level is set automatically,
regardless of the position of VOLUME, Incredible
Surround, DSC or VEC.
– To prevent accidental recording, break out the
tab on the left shoulder of the tape side that you
want to protect.
– If "
CHECK TAPE" is displayed, the protection
tab has been broken. Put a piece of clear adhesive
tape over the opening.
Recording the mixed sound /
One Touch Recording
¶ During microphone mixing, you can record the
mixed sound on a tape in tape deck 2 except
dubbing mode.
¶ For One Touch Recording, as soon as you press
RECORD, the current source (VCD, TUNER or
AUX) will be recorded on tape deck 2.
1 Load a blank tape in tape deck 2.
2 Press RECORD to start recording.
➜ The REC starts flashing.
3 Press Ç to stop recording.
Note:
– When you press RECORD while in TAPE mode,
"
SELECT SOURCE" will be displayed. One Touch
Recording is not possible in TAPE mode.
pg 01-32/V320/21-Eng 28/05/2001, 09:02 AM 26