beautypg.com

Rerecording (tape duplication) 33 – Philips SVB106 User Manual

Page 33

background image

2

VCR 1 will play your tape. Insert a prerecorded tape in VCR
1.
If the tape does not have a record tab, playback begins. If this hap-
pens, press the STOP/EJECT button on VCR 1 once.

1

Make the connections shown above.

Rerecording (Tape Duplication) 33

3

VCR 2 will record your tape. Insert a blank tape in VCR 2.
Make sure the record tab is intact (details are on page five). Make sure
the VCR 2 power is on and VCR 2 is in VCR position. (The VCR/TV
light will appear. If it does not, press the VCR/TV button once.)

4

Turn on the TV and set it to channel 3 or 4, whichever
channel the CH3/CH4 switch on VCR 2 is set to.

5

Point the remote control at VCR 2. Press the Number but-
tons 0, 0, 1 or 0, 0, 2.
(See Helpful Hints at right.)

6

Point the remote control at VCR 2. Use the SPEED button
to select SP or SLP.

7

Press the PLAY button on VCR 1 and the REC(ord)/OTR
button on VCR 2 at the same time.

8

To stop recording, press the STOP/EJECT button on VCR 2
once, then stop the tape on VCR 1.

• If you use the AUDIO and VIDEO IN

jacks on the back of VCR 2, press
Number buttons 0, 0, 1 at step 5.
LineIn Rear (L1) will appear on the
screen.

• If you use the AUDIO and VIDEO In

jacks on the front of VCR 2, press
Number buttons 0, 0, 2 at step 5.
LineIn Front (L2) will appear on the
screen.

• Unauthorized recording of copyright-

ed television programs, video tapes,
or other materials may infringe on
the rights of copyright owners and
violate copyright laws.

• If a program has copyright protection,

it may not record clearly.

• Audio and video cables are not sup-

plied.

• The illustration uses two VCRs just

like yours. Different VCRs may oper-
ate differently.

• When the VCR is in Line Input mode

(L1 or L2), the screen will be blue.

Helpful Hints

VCR 1

Playing VCR

VCR 2 - Recording VCR

1. Audio cables from AUDIO OUT Jacks
of VCR 1 to AUDIO IN Jacks of VCR 2

2. Video cable from VIDEO OUT Jack of
VCR 1 to VIDEO IN Jack of VCR 2

3. RF coaxial cable

from the OUT jack of

VCR 2 to the TV’s

ANTENNA IN Jack

This manual is related to the following products: