Philips SVB106 - Manual (Page 14)

14 Setting the Clock
Follow the steps below to set your VCR’s clock. Make sure:
● The VCR is on and in VCR position. (The VCR/TV light will
appear. If it does not, press the VCR/TV button once.)
3
While the MONTH space is flashing, press the PLAY but-
ton or the STOP button repeatedly until the desired
month appears. Then, press the F.FWD button.
4
While the DAY space is flashing, press the PLAY button
or the STOP button repeatedly until the desired day
appears. Then, press the F.FWD button.
5
While the YEAR space is flashing, press the PLAY button
or the STOP button repeatedly until the desired year
appears. Press the F.FWD button. The day of the week will
appear automatically.
• If the clock has never been set, the
CLOCK SET menu may appear
immediately when you press the
MENU button. If this happens, fol-
low the instructions from step 3
above.
• To display the time, press the DIS-
PLAY button repeatedly until the
time appears on the screen.
• Power failures that last for more
than one minute can cause you to
lose your clock setting.
• Press the REWIND button to go
back one step from the current step
during steps 4-8.
Helpful Hints
1
2-5
2
Press the PLAY button or the STOP button repeatedly to
select CLOCK SET. Then, press the F.FWD button.
1
Press the MENU button until MENU 1 appears.
- M E N U 1 -
B TIMER PROGRAMMING
AUTO REPEAT
[OFF]
PICTURE SELECT
CHANNEL SET UP
CLOCK SET
LANGUAGE SELECT
AUTO SATELLITE LINK
CLOCK SET
MONTH DAY YEAR
– – / – – – – – –
HOUR MINUTE AM/PM
– – : – – – –
CLOCK SET
MONTH DAY YEAR
0 3 / – – – – – –
HOUR MINUTE AM/PM
– – : – – – –
CLOCK SET
MONTH DAY YEAR
0 3 / 2 0 – – – –
HOUR MINUTE AM/PM
– – : – – – –
CLOCK SET
MONTH DAY YEAR
0 3 / 2 0 2 0 0 0
HOUR MINUTE AM/PM
– – : – – – –