Philips SVB106 - Manual (Page 23)

6
Press the EJECT button to remove the tape.
4
Press the STOP button to stop playback.
5
Press the REWIND button to rewind the tape.
Playing 23
Read and follow the steps below to play a tape.
1
Turn on the TV and set it to channel 3 or 4, whichever chan-
nel to which the CH3/CH4 switch on the back of the VCR is set.
2
Insert a tape in the VCR. The POWER, VCR/TV, and CST.IN
lights will appear. If the tape’s record tab has been removed, play-
back will begin automatically.
3
If playback does not start automatically, press the PLAY
button.
Turn on the TV.
Insert a tape.
3
1
2
• If the tape you want to play is
already in the VCR, make sure the
VCR power is on and the VCR is in
VCR position. (Press the VCR/TV
button so that the VCR/TV light
appears.) Then, press the PLAY but-
ton.
• Other playback options and fea-
tures are on pages 34-44.
• When you play a tape recorded in
S-VHS format on this unit, you can
not get the high resolution that
would be available on an S-VHS
VCR. Noise lines (black and white
streaks) may appear on the picture.
• If AUTO REPEAT is set to ON, play-
back will begin automatically, even
when the record tab is intact.
Helpful Hints
6
4
5
S-VHS Quasi Play Back (SQPB)
This VCR has a SQPB function that allows you to view a tape
recorded in S-VHS format. A tape recorded in S-VHS format will
play the same as a tape recorded in normal format. This VCR
detects whether the tape is recorded in S-VHS format or in nor-
mal format.